Folks,
A while back there was considerable discussion about the availability of plow points/shares for low volume plows. As I remember, there was a company that used to make those kinds of parts, but the company had closed and sold the business/tooling, etc. to an Amish/Mennonite business in Pennsylvania (I believe).
I have searched the forum with no success. Any help to point me in the right direction would be appreciated. Thanks.
Bill
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Low Volume Plow Points
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
-
- 10+ Years
- Posts: 5209
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Low Volume Plow Points
you can try this Bill, I do not know if it is still around
tim
Whitehorse Equipment, LLC
5566 Old Philadelphia Pike
Gap, PA 17527
1717-768-8313
tim
Whitehorse Equipment, LLC
5566 Old Philadelphia Pike
Gap, PA 17527
1717-768-8313
- Mr E
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
- Contact:
Re: Low Volume Plow Points
Bill,
As you probably remember, I went through this exercise trying to rebuild the pair of 12" plow for my Super A. I completely struck out. Then by a stroke of luck, one of the gentlemen I called pointed me to the Blacksmith, Mr. Jim White. A true gentleman he is and did nice work. I sent him my old parts and rebuilt them to original.
Now mind you, I didn't say it was real cheap. But my plow works nicely again. Don't know if he would remember me, but feel free to use my name if you wish. I am sending you a PM with his personal information.
Roy
As you probably remember, I went through this exercise trying to rebuild the pair of 12" plow for my Super A. I completely struck out. Then by a stroke of luck, one of the gentlemen I called pointed me to the Blacksmith, Mr. Jim White. A true gentleman he is and did nice work. I sent him my old parts and rebuilt them to original.
Now mind you, I didn't say it was real cheap. But my plow works nicely again. Don't know if he would remember me, but feel free to use my name if you wish. I am sending you a PM with his personal information.
Roy
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
- Bus Driver
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: Low Volume Plow Points
Sounds like another justification for never throwing away anything. Who knows what technique or technology may be available next year to repair/restore the item?
Luck favors those who are prepared
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Low Volume Plow Points
tst wrote:you can try this Bill, I do not know if it is still around
tim
Whitehorse Equipment, LLC
5566 Old Philadelphia Pike
Gap, PA 17527
1717-768-8313
Nice folks to deal with. Bought out the old Crescent Forge inventory--I managed to get a couple of shares for an F194 with an HSKA bottom. Amish/Mennonite so phone contact only.
-
- 10+ Years
- Posts: 1174
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: Low Volume Plow Points
Bus Driver wrote:Sounds like another justification for never throwing away anything. Who knows what technique or technology may be available next year to repair/restore the item?
I have posted several times that dad used to simply weld a piece of steel, usually a piece of an old leaf spring, on the tip of the share. This will make the point dig in like new. He used steel points, too many stones for cast points. Points were rebuilt several times. Vern
Who is online
Users browsing this forum: No registered users and 23 guests