This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New member from Pennsylvania
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 70
- Joined: Sun Jan 05, 2014 8:56 am
- Zip Code: 15909
- Tractors Owned: 1951 Farmall Cub
- Circle of Safety: Y
- Location: Johnstown, Pennsylvania
New member from Pennsylvania
Hello , to "The Big Red Nation" if you please. I own a 1951 Farmall Cub with a belly mower and a home made snow plow. I just got a very nice, like new Leveling and Grader blade for it. Its works a whole lot better than the plow that I had on it before. Had the hydraulics rebuilt in 2004 and a total motor rebuild in 2007. I am intrigued by the "power angle" setup that I have seen on this site! Since I am sneaking up on old age and have 2 replacement knees, I want this setup on my Cub! If anyone out there can explain how to "plug" into the tractors hydraulic system, it will GREATLY be appreciated. I like the idea of the 2 inch cylinders . I am assuming that I must have a 2 way control to operate it? And is 8 inches of stroke enough to turn the blade adequately? Thank you.............
-
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: New member from Pennsylvania
Welcome to the forum, if you do a search with in the site there have been a few plows modified to be power angle to look at
Tim
Tim
-
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: New member from Pennsylvania
Welcome to the Forum. Here's a link to a couple of designs that were done a few years ago. There have been more since, but these may get you started. There are several Forum members that are very knowledgeable about hydraulics, so ask questions as they arise.
viewtopic.php?f=60&t=57962
Bob
viewtopic.php?f=60&t=57962
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 70
- Joined: Sun Jan 05, 2014 8:56 am
- Zip Code: 15909
- Tractors Owned: 1951 Farmall Cub
- Circle of Safety: Y
- Location: Johnstown, Pennsylvania
Re: New member from Pennsylvania
Thanks guys for the links. I will check them out. I can see that there is a wealth of information here, sorry I didn't stumble upon it years ago.
- dgrapes59
- 10+ Years
- Posts: 3732
- Joined: Sun Jul 13, 2008 10:05 pm
- Zip Code: 45067
- Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N - Circle of Safety: Y
- Location: OH, Trenton
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: New member from Pennsylvania
Welcome to the forum from a fellow Pennsylvanian.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
- Dale Finch
- 10+ Years
- Posts: 6676
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: New member from Pennsylvania
February would be a good time to take a break from Old Man Winter...come on down to DSCF in Sneads, FL, and meet some fellow Cub fanatics!! WELCOME!
- Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: New member from Pennsylvania
snoman7c wrote:... sorry I didn't stumble upon it years ago.
Welcome to the forum. Easy to make up for lost time, jump right in. As Dale suggested, try out the DSCF. Check it out here http://www.dscubfest.com/
Bill
-
- 10+ Years
- Posts: 70
- Joined: Sun Jan 05, 2014 8:56 am
- Zip Code: 15909
- Tractors Owned: 1951 Farmall Cub
- Circle of Safety: Y
- Location: Johnstown, Pennsylvania
Re: New member from Pennsylvania
Florida Does sound great, BUT right now I am looking forward to pushing some snow with my new plow! We usually get hammered here in Western Pa! So far, it has just been cold, very cold.
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
Re: New member from Pennsylvania
Welcome to the forum from just up the road in the northern suburbs of Pitrsburgh! Keep on posting! I'm hoping to try to host a get together sometime in 2014 for folks to get together and talk about, work on and work with their cubs!
Post pics of your cub! We love pics!
Post pics of your cub! We love pics!
- grumpy
- Cub Pro
- Posts: 2780
- Joined: Tue Jan 10, 2006 12:03 am
- Zip Code: 15522
- Circle of Safety: Y
- Location: PA. Bedford (Centerville)
Re: New member from Pennsylvania
Welcome to the forum. Send ricky racer a private message about the power angle. He did an amazing job on his. We'll have to get together this spring. Grump
David Dee Mock-Leonard
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
-
- 10+ Years
- Posts: 393
- Joined: Tue Nov 21, 2006 12:39 pm
- Location: Blountville, TN.
-
- 10+ Years
- Posts: 70
- Joined: Sun Jan 05, 2014 8:56 am
- Zip Code: 15909
- Tractors Owned: 1951 Farmall Cub
- Circle of Safety: Y
- Location: Johnstown, Pennsylvania
Re: New member from Pennsylvania
Here is my pride and joy! Running like a BMW !
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: New member from Pennsylvania
Welcome to the forum. That's a fine looking Cub!
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: New member from Pennsylvania
That is a fine looking Cub. It looks like you're having fun!
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
Who is online
Users browsing this forum: No registered users and 18 guests