I'm looking for the gasket, spring and valve (#251 400, 401, 403 respectively) for the oil pressure regulating valve for the C60 engine. I have the plug (#251 402).
Can't find a supplier for these parts. Any suggestions? Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Parts for the Cub oil pressure regulating valve
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Parts for the Cub oil pressure regulating valve
You can buy them right from the Case/IH dealer
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
Thanks for the input. I checked the Case/IH parts website. Found the parts, but they're no stock. Case suggested I contact a local dealer directly. I'm thinking what's the chance a local would have these parts if the parts website is no stock.
-
twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: Parts for the Cub oil pressure regulating valve
The Case/IH dealers that I dealt with in Illinois would check the stock of other dealers nationwide. They always found what I needed.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
Eugene
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Parts for the Cub oil pressure regulating valve
Classified Ads, this site. Several advertisers part out Cubs. JP's and Hamilton Bob's would be a good start.
Also, a number of folks not listed in the classified ads section part out Cubs.
The gasket should be a hardware store or any implement dealership item. In stock.
Also, a number of folks not listed in the classified ads section part out Cubs.
The gasket should be a hardware store or any implement dealership item. In stock.
I have an excuse. CRS.
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
twotone wrote:The Case/IH dealers that I dealt with in Illinois would check the stock of other dealers nationwide. They always found what I needed.
Thanks--that's good to know.
-
Arthur Luke
- Cub Pro
- Posts: 852
- Joined: Fri May 09, 2008 2:47 pm
- Zip Code: 74022
- Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
- Location: OK, Copan
Re: Parts for the Cub oil pressure regulating valve
TM Tractors had them last time I looked, got a spring just awhile back. You might check with them when they open back up after the holidays.
Have a good day, Art 
-
John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Parts for the Cub oil pressure regulating valve
F37, are you buying these because of low oil pressure when hot? If you are, it is probably crankshaft bearings, not the regulator valve.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
I'm rebuilding the engine from a non-running 1948 Cub. The oil pressure regulating valve (the cup that fits on the end of the spring) is stuck in the hole and appears to be blocking an oil channel. Before I try extreme measures to remove that valve, I would like to have a spare in hand since I'll probably have to destroy that valve to get it unstuck.
-
Eugene
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Parts for the Cub oil pressure regulating valve
Tip of the week. How to remove stuck pressure regulator valve.
http://farmallcub.com/phpBB2/viewtopic. ... 45#p472781
http://farmallcub.com/phpBB2/viewtopic. ... 45#p472781
I have an excuse. CRS.
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
Thanks. I saw that thread. I'll give it a try--along with a few other suggestions I found in this forum.
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
Well, I haven't found a vendor for that oil pressure regulating valve part.
But I was able to remove the stuck part of that valve that was giving me trouble.
I used the technique described in an old thread in this forum using a 1/2" OD soft copper tube. Cut about 8" length, straightened it in a vise, beveled one end, lightly tapped the tube into the stuck valve part with a ball peen hammer, worked the tube side-to-side and rotated it with a vice grip pliers. Repeated this procedure and few times and the part came out attached to the end of the tube. Pretty slick.
Almost makes me think the IH engineers set up that valve part so that 1/2" OD copper tube method would free the stuck part. Nah, I don't think those guys were that clever
.
But I was able to remove the stuck part of that valve that was giving me trouble.
I used the technique described in an old thread in this forum using a 1/2" OD soft copper tube. Cut about 8" length, straightened it in a vise, beveled one end, lightly tapped the tube into the stuck valve part with a ball peen hammer, worked the tube side-to-side and rotated it with a vice grip pliers. Repeated this procedure and few times and the part came out attached to the end of the tube. Pretty slick.
Almost makes me think the IH engineers set up that valve part so that 1/2" OD copper tube method would free the stuck part. Nah, I don't think those guys were that clever
.- Cub-oil pressure valve-1.JPG (64.68 KiB) Viewed 647 times
- Cub-oil pressure valve-2.JPG (76.36 KiB) Viewed 647 times
- Cub-oil pressure valve-3.JPG (46.88 KiB) Viewed 647 times
- Cub-oil pressure valve-4.JPG (59.3 KiB) Viewed 647 times
-
Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Parts for the Cub oil pressure regulating valve
TM Tractor Parts lists all three parts and in stock.
http://www.tmtractor.com
http://www.tmtractor.com
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Parts for the Cub oil pressure regulating valve
Eugene wrote:Tip of the week. How to remove stuck pressure regulator valve.
viewtopic.php?f=1&t=17676&start=45#p472781
Thanks Eugene, I just now caught this. I copied Ron's tip into the How To forum so it will be easier to find for the next guy.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
fl37
- 10+ Years
- Posts: 43
- Joined: Thu Dec 30, 2010 11:35 am
- Zip Code: 96021
- Tractors Owned: 2008 Mahindra 5525, 1964 MF-135 diesel, 1951 Farmall Super A, 1951 Minneapolis Moline BF, 1945 Oliver 60 Row Crop, 1949 JD B widefront
- Location: Northern CA Tehama County
Re: Parts for the Cub oil pressure regulating valve
Don McCombs wrote:TM Tractor Parts lists all three parts and in stock.
http://www.tmtractor.com
Found it. Thanks for your input.
Who is online
Users browsing this forum: Glen and 48 guests
