This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
CUB DISTRIBUTOR INSTALL
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3
- Joined: Thu Feb 06, 2014 3:05 pm
- Zip Code: 77535
CUB DISTRIBUTOR INSTALL
I bought a cub that someone else has been working on and was unable to make run. It has compression (75lbs), getting good fuel, getting spark through the plugs (just not sure if its at correct time). He says he did not pull the distributor, but I think he did. It will not start, we also just installed a new head gasket, condensor, plugs and wires. How do I reinstall the distibutor once, I remove it form the housing, to make sure its timed correctly. Thanks, TF
-
- Team Cub
- Posts: 11860
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: CUB DISTRIBUTOR INSTALL
Welcome to the Forum. Here's an old thread that I think will answer your question: viewtopic.php?f=1&t=65303&p=532369&hilit=distributor+installation#p532369
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: CUB DISTRIBUTOR INSTALL
Welcome to the forum from Arkansas. Bob gave you good information, if you have more problems just holler and someone on here will give you the answer. I am assuming you have the distributor and not the magneto.
-
- 10+ Years
- Posts: 3
- Joined: Thu Feb 06, 2014 3:05 pm
- Zip Code: 77535
Re: CUB DISTRIBUTOR INSTALL
Thanks for the info. The distributor was installed incorrectly. We removed/reinstalled and it start with the hand crank on the third time. Thanks again, CR
-
- Team Cub
- Posts: 11860
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: CUB DISTRIBUTOR INSTALL
Glad to hear you got it going. Let us know if you need help with anything else.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: No registered users and 79 guests