This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1949 Cub Wiring Help Needed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: 1949 Cub Wiring Help Needed
A closer look at the appropriate Parts Catalog for your model year reveals that the in-dash fuse was used from tractor serial number 115403 and up. Ricky's link shows diagrams from a 1955 Owner's Manual.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 1949 Cub Wiring Help Needed
TC-37F, Parts Catalog, shows the fuse holder: "starting and lighting system - 6 volt - Cub tractor w/serial no 210000 and below".
I have an excuse. CRS.
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: 1949 Cub Wiring Help Needed
That dash looks to have original yellow paint and no red, plus maybe a key switch hole and fuse hole. I'm guessing it is from a 1970's Cub tractor. There might be other parts from a 1970's Cub on it too so I would investigate some casting codes and the suttle changes on the parts over the years. What does the oil filler tube look like? Long or short?
I've noticed that alot of times when you find some small parts changed, that the PO did it when the engine was replaced by one from a newer machine and he used several parts at that time to fix what all his tractor needed.
I've noticed that alot of times when you find some small parts changed, that the PO did it when the engine was replaced by one from a newer machine and he used several parts at that time to fix what all his tractor needed.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 1949 Cub Wiring Help Needed
Use Jim's link! The Top one is correct for your tractor IF you are using a mag.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 72
- Joined: Wed Sep 18, 2013 8:13 pm
- Zip Code: 73456
- Tractors Owned: 1951 Ford 8N
1951 Farmall Cub
1944 John Deere B - Location: Ringling, OK
Re: 1949 Cub Wiring Help Needed
Good luck guys. Post your progress on here!
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: 1949 Cub Wiring Help Needed
This is my 50 with a VR, appears the mag was changed out at some point (there is a tachometer 'hole' in the distributor) so it is not original. Also the LONG EAR dash was pretty common in 1949.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 5+ Years
- Posts: 2
- Joined: Sat Nov 26, 2016 11:35 am
- Zip Code: 20124
Re: 1949 Cub Wiring Help Needed
Hi. This is very helpful. Is the wire that goes from the pull starter to the fuse case soldered or how does it go on. Thanks! Ray
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 1949 Cub Wiring Help Needed
The wire from the pull starter switch goes to the ammeter, not the fuse.
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: 1949 Cub Wiring Help Needed
I think he is talking about the push-pull ignition switch, Jim.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 1949 Cub Wiring Help Needed
Don McCombs wrote:I think he is talking about the push-pull ignition switch, Jim.
OK, that hadn't occurred to me. If he is dealing with a mid-'50 to '58 or so (battery ignition & voltage regulator), here is the whole diagram.
-
- 5+ Years
- Posts: 69
- Joined: Mon Jul 11, 2016 11:07 pm
- Zip Code: 75835
- Tractors Owned: 2 -184's, 2-154's, 12-cubs high crop, 1 with fast hitch, 1- lobby with fast hitch, several parts tractors.
Re: 1949 Cub Wiring Help Needed
Hello neighbor, why don't you PM me and maybe I could make a day trip and check out your endeavor some time soon. I live in Crockett and just bought my sixteenth . Welcome to a bunch that likes to have fun or ,as my woman says, a bit touched in the upper region.
Who is online
Users browsing this forum: No registered users and 44 guests