Rod Knock

Farmall H, HV & Super H, 300 & 350, 1939-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
WKPoor
5+ Years
5+ Years

Rod Knock

Postby WKPoor » Thu Oct 20, 2005 4:47 pm

I'm solicting ideas for an engine noise I'm having with the H. There is a loud tick that appears to come from the #4 cylinder. I pulled the plug wire while it was running and it becomes a loud knock. Pulling other cylinder wires changes nothing. Checked valve rockers and they all good as is the lash. No noise is coming from the valves with the cover off either.
Most of what I know about true rod knock is its worse with increasing RPM and load. This worsens with decreasing RPM and load.
Other than this noise all engine parameters are normal and it runs nicely.

Fire away!! :lol:

Donny M
5+ Years
5+ Years

Postby Donny M » Thu Oct 20, 2005 6:18 pm

I would suggest using pump gas :lol: :lol: :lol:

Seriously, it sounds like a rod bearing to me.
8)

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Thu Oct 20, 2005 9:24 pm

Was raised on Hs, and I agree with donny, sounds like a rod beairng to me.
If you are not part of the solution,
you are part of the problem!!!

User avatar
beaconlight
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Fri Oct 21, 2005 6:17 am

I would take it down and check. Continuing to run it may score up the crankshaft if it is not already so.

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 0 guests