Front Bolster Wedge Help

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
farmallcub49
10+ Years
10+ Years
501 Club
501 Club
Posts: 862
Joined: Mon Feb 03, 2003 5:05 pm
Zip Code: 56374
Circle of Safety: Y
Location: MN, St. Joseph

Front Bolster Wedge Help

Postby farmallcub49 » Sat Nov 12, 2005 10:19 pm

I have to wander over here to the other larger, but not as cute IH forum. My buddy has an M, narrow front, that shimmy and shakes in the front end. He has one of those wedges, but which end faces what way? Does the thick part go to the front or vice versa?

Thanks
Andy
'49 Cub, '58 LoBoy,'61 LoBoy, '61 Modified LoBoy, '61 Customized LoBoy, way to many attachments, '22 Centerdoor Sedan, '24 Ford T Roadster, '25 Ford TT, '24 C Cab, '13 Touring, '24 Model T Snowmobile,

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Postby Bigdog » Sat Nov 12, 2005 10:38 pm

Andy, if you look at the wedge, it is marked. The thin edge goes to the front.

http://albums.photo.epson.com/j/ViewPhoto?u=4001561&a=30182012&p=60713134
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
farmallcub49
10+ Years
10+ Years
501 Club
501 Club
Posts: 862
Joined: Mon Feb 03, 2003 5:05 pm
Zip Code: 56374
Circle of Safety: Y
Location: MN, St. Joseph

Postby farmallcub49 » Sat Nov 12, 2005 10:58 pm

Thanks, BD and Duh!

I have never looked at it, but I guess the manufacturer used the KISS method of design; Keep It Simple Stupid!

Andy
'49 Cub, '58 LoBoy,'61 LoBoy, '61 Modified LoBoy, '61 Customized LoBoy, way to many attachments, '22 Centerdoor Sedan, '24 Ford T Roadster, '25 Ford TT, '24 C Cab, '13 Touring, '24 Model T Snowmobile,

WKPoor
5+ Years
5+ Years

Postby WKPoor » Sun Nov 13, 2005 6:20 am

Andy, I'm not actually familiar with the wedge which (correct me if I'm wrong Bigdog) give the bolster some caster to help eliminate the shimmy. However most of the shimmy may be related to the upper bolster bushings being worn out. If you jack up the front end from the frame rails letting the lower bolster hang, see how much play is up there. You might find its loose as a goose. The bushings are still available from Case IH. Also how wide are the front wheels spaced? I've found wider spacing aggrevates the issue.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Nov 13, 2005 10:13 am

WK, I believe it iw a combination of the two problems. the lack of castor tends to emphaaize the worn bushings, makeing the results worse.
If you are not part of the solution,
you are part of the problem!!!


Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 1 guest