Fri Dec 16, 2005 9:46 am
I have been wanting to do this for the past 10 yr. I finally got started yesterday.
First, 100 tons of AB mix is spead out and rolled down. I'm half done with the AB now. After the mix is cured, we will apply 1.5" of crushed brown granite 1/4" & smaller. that will be wetted down and rolled again. After everything dries again we will coat the entire drive with a special polymer that binds everything together and eliminates any dust.
Last edited by Arizona Mike on Sun Feb 05, 2006 11:16 am, edited 2 times in total.
Fri Dec 16, 2005 9:55 am
The final step in the process interests me. Do you know the name of the polymer product?
Fri Dec 16, 2005 11:18 am
Very nice Mike.Cant wait to see the finished product...Nice loader too!
Fri Dec 16, 2005 11:30 am
Fri Dec 16, 2005 11:44 pm
Don, the polymer is a synthetic organic fluid that meets all environmental standards. It is sprayed on and does not ever totally cure. Its being used in large quantities in Iraq. It is available for a free 1 L. sample from Soil Works, LLC. Gilbert, AZ. Their web site is http://www.soilworks.com
. Bottom line...I think its Elmer's Glue.
Yes Bigdog its a JD 210.
Made some progress today, but the water truck guy could not get his pump going.
The AB needs to be soaked before its rolled.
Sat Dec 17, 2005 12:03 am
Mike You say the AB mix has to cure, what is the AB mix? Is it just different grades of gravel (called stones in some parts of the country) or is there some other product mixed in with it? The picture makes it appear to be what is called "dense grade" around here - crushed limestone that ranges from dust to about 3/4" in size, that will roll down and pack very well to create a good road base.
Sat Dec 17, 2005 5:05 am
I like the stone walls for curbs. They are well laid. Notice the grass that looked so suculent and green in earlier posts has browned off. Looking good.
Sat Dec 17, 2005 10:09 am
Paul B wrote:Mike You say the AB mix has to cure, what is the AB mix? Is it just different grades of gravel (called stones in some parts of the country) or is there some other product mixed in with it? The picture makes it appear to be what is called "dense grade" around here - crushed limestone that ranges from dust to about 3/4" in size, that will roll down and pack very well to create a good road base.
The stone you describe is called berm here. There are two grades... coarse and fine. I think the name comes from its' use on the berm along the roads, but maybe it's the other way around.
Sat Dec 17, 2005 10:23 am
Paul, I should have said dry...The AB mix sounds like "dense grade" except this mix has lime mixed with the crushed limestone. Its used on many of the roads out here. When its soaked, rolled and dries out, it sets up almost like concrete.
Sat Dec 17, 2005 1:31 pm
This may be a silly question, but once the whole thing is sealed up with the polymer, and because there's curbs on each side, where does the rain go??? It looks crowned in the middle?
Sat Dec 17, 2005 2:25 pm
Thanks, Mike. I found it under http://www.soiltac.com
Sat Dec 17, 2005 11:24 pm
Sun Dec 18, 2005 7:10 am
My Dad spends the winter months in Yuma and he was telling me about this product a while back. I asked him to find out the price structure and he never got back to me. Is the product close in price to asphalt pavement? I have a long driveway ,Iâ€™m going to have to do something about someday.
Those rock walls along the road look good.
You have put a lot of time and work in your place and it shows it! If you can please; keep posting pictures of what youâ€™re doing.
It really gives me some ideas; I would like to do somedayâ€¦..
Last edited by JackF on Sun Dec 18, 2005 8:58 am, edited 1 time in total.
Sun Dec 18, 2005 8:48 am
That's much Better Mike!
Sun Dec 18, 2005 2:32 pm
Lookin good Mike!! How long is your driveway?
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.