New DrivewayModerator: Team Cub
36 posts
• Page 3 of 3 • 1, 2, 3
Well, I am happy that this is finished. It was more work than I expected
 ...but what else is new right.
Here are some pictures showing the gluing process: Glue is applied in a heavy coat and grade gets final adjustments. 
Tilling implement mixes the glue and the minus granite. 
Granite and glue mix prior to rolling: 
1.5 T. roller: 
All finished
the "Cub ramp" "The time you spend making sure you are safe is probably the most productive time you can spend!"
George Willer 
Mike,
Very nice! Now you want get those Cub tires dirty I bought an old tractor all dusty and worn,
knew nothing about her just the year she was born I washed her and greased her and painted her red Now she lives happily right here in my shed. HOME of THE STONETHROW CUBFEST 2007 Cub Tug Champion
Looks super Mike! I can see a CubFest West in your future!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem. My wife says I don't listen to her. - - - - - - - - Or something like that! http://www.cubtug.com
WOW !
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie Cub Manual Server
Thanks guys
This process is still fairly new out here. It is about 1/3 the cost of concrete, and about 1/2 the cost of asphalt or chip and seal. The surface compaction of the finished driveway is about 1600 psi, compared to 1200-1400 for asphalt and 2000-2500 for concrete. Ralph, you should look into this for your place. Would save you $$$$ over concrete  "The time you spend making sure you are safe is probably the most productive time you can spend!"
George Willer
36 posts
• Page 3 of 3 • 1, 2, 3
Who is onlineUsers browsing this forum: No registered users and 2 guests |
|
