Booger weld on the axle...

Thu Mar 16, 2006 9:07 pm

Here's a picture of the weld on the axles that supposedly was going to hold them together instead of the pin (which is in upside down in this picture...) The weld is broken and I hope to just grind it off and ignore it...


Thu Mar 16, 2006 9:15 pm

Allen, when you grind the weld off, you may find that the holes in the inner axle tube are elongated and worn.


Thu Mar 16, 2006 9:16 pm

They are for sure.

Is there a fix for that?

Thu Mar 16, 2006 9:20 pm

You can weld them up and re-drill them or replace the inner axle tubes.