Farmall Cub

by **JBall8019** » Sat Mar 25, 2006 10:58 pm

Hi,
There is a slotted screw under the distributor cap. would this be a point to add oil? I was wondering becasue the distibutor sounds alot louder than my cubs' distributor.
Thanks
john

by **Eugene** » Sat Mar 25, 2006 11:28 pm

http://www.farmallcub.com/phpBB2/viewtopic.php?t=12394

by **JBall8019** » Sun Mar 26, 2006 9:01 am

Thanks!
I think i have some zerks in the barn. Will just a few pumps from my grease gun work? also i have been putting oil in my cubs distributor, will that cause any dammage?
John

by **beaconlight** » Sun Mar 26, 2006 1:46 pm

No just don't over do it.

bill

by **JBall8019** » Sun Mar 26, 2006 6:42 pm

hey guys i need some advice. i put a zerk into the hole wehre the plug was but i could only get onle pump of my grease gun in the hole. i looked in the hole after and it still could use more grease. is there some other way of getting grease in there?
thanks
John

by **George Willer** » Sun Mar 26, 2006 6:49 pm

Use a zerk that isn't plugged.

by **JBall8019** » Mon Mar 27, 2006 3:52 pm

lol!!! i already checked that zerk to see if it was working properly and it was. i think i will try again but making sure the zerk isnt snug in the hole so air can escape.
John

Farmall Cub

M Distributer question

M Distributer question

Share On:

Who is online