Farmall H, HV & Super H, 1939-1954
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
9 posts • Page 1 of 1
The carb on my 48 H is in need of a rebuild, we have had the tractor since 1967 and it's never been off since we have owned it. I have never been inside an H carb (only Cub's ), so I need some help. How involved is it? Is it tricky to unhook the govenor linkage's? Any help is appreciated.
Thank's Eugene, So what about the govenor linkage's, are they difficult to hook up? Why I ask is I have heard they are a nightmare to hook up when installing the carb. Thank's again.
It's been a zillion years since I worked on an H carburator. I don't recall any specific problems. I'm thinking cotter keys.
Just checked the I&T manual. It doesn't mention any specific linkage problems.
Inserting the cotter keys can sometimes be a pain because they are located on the back side of the carburator. I usually unbolt the carburator, tilt it sideways then remove the cotter keys. Reverse for installation.
There's nothing to take apart, other than the screws holding the telescoping tube in place. Once you have it apart, you'll see how to get it back together and in time. I have the same job to do on my '48 H soon. Last time I ran it it was a little ragged... but the gas must be 3 or 4 years old.
You'll find it nearly as simple as the Cub carb with an adjustable main jet added.
The most affectionate creature in the world is a wet dog. Ambrose Bierce
I haven't worked on an H carb in a while, but you will find a few differences, one of whihc being it is cast iron, so rust forming in passages is a problem if it has set for a while. Of coulrse that also means you don't have to worry about warping. An uncle wanted em to check his a few years ago. it had set outisde during the winter with water in carb. float was crushed, but carb unharmed. As to the governor linkage, there is an ear that slips into a notch. no big deal to put back together.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
Thank's for the responce's guy's. But what about a carb kit. You guy's don't care for TISCO kit's for cub's, but what about the H?
Sometimes the only part needed for carb overhaul is the bowl gasket. The rest just may need a good cleaning.
9 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests