Mon May 22, 2006 2:38 pm
Finally got around to finishing up the 3-pt. hitch on the Super A. Built it mostly from parts I got from Redland Hill on eBay and from the local Tractor Supply Company, with a bunch of fabrication required for the top link mount point. I think it came out ok! Next up, the AC generator mount for the Cub - the driveshaft is complete and the pulleys are mounted, now I just need to figure out where to put it.
Mon May 22, 2006 7:07 pm
that looks great
Mon May 22, 2006 7:46 pm
Now, I just need a 3-point *implement*!
Tue May 23, 2006 12:07 am
Looks good Allen. But you need a sway bar to keep it from moving left and right.
Tue May 23, 2006 7:30 am
Looks good Allen - Like Merlin said, add a sway bar or some chains. You don't want those pretty straight arms wrapping around a tire.
Tue May 23, 2006 6:42 pm
Oops, I forgot to show the chains. It's hard to see them, but in the center of each lower arm is a big "U" hook already installed, and I'm making the tabs to put the chains into on the final drives.
Tue May 30, 2006 10:15 am
Hmmm, one question.
A lot of the kits come with a beefy bar at the top that's U-bolted to the stock swaybar tube... I didn't bother to do that, do I need to worry about that tube getting bent?
Tue May 30, 2006 7:15 pm
personally I think you will be fine, unless you plan on really really yanking on somthing... that's just me tho
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.