Super A with Waterpump - Belt is Not Fitting
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 2392
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35111
- Circle of Safety: Y
Super A with Waterpump - Belt is Not Fitting
Trying to help a friend out on his restoration of a 1949 Super A and he decided to add a water pump to it. Upon installing the belt (he used CNH p/n 60712D and crossed to Napa 2526353) it does not clear the lower outlet on the water pump. He said he ground the outlet down a little bit hoping it would help it clear, but that isn't the case. Has anyone else ran into this problem? I remember the outlet on the aftermarket pumps having a flat spot on them where the belt runs, but I can't tell if this one has that or not. If it does have the flat spot, it isn't much.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! 
Chase
205-368-5339
ihfarmallrtr@gmail.com


-
- 5+ Years
- Posts: 3436
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'56 Cub "Boris"
'48 Super A "Bubba" - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Super A with Waterpump - Belt is Not Fitting
Chase, I added a water pump to my '48 SA, and it did have a flat spot. Hopefully you can see it in the first two photos below. If I remember right, though, I still had to grind a tad more off, and was worried about the thickness of the outlet wall. But it seems to be fine. (This was an original, from a forum member, that I rebuilt)
-
- 5+ Years
- Posts: 2392
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35111
- Circle of Safety: Y
Re: Super A with Waterpump - Belt is Not Fitting
Dale,
Apparently the "correct" belt was the problem. He had Brandon from Burch Store send him an old belt that was on a tractor on his yard and it seems to fit perfectly and work. The problem was in the width of the new belt. The numbers he used and I found all match up to what is "correct" for it though. That used old belt is visually narrower and the number of it doesn't seem to match anything I've searched for in Google. The old used belt is marked clearly as 757713.
Apparently the "correct" belt was the problem. He had Brandon from Burch Store send him an old belt that was on a tractor on his yard and it seems to fit perfectly and work. The problem was in the width of the new belt. The numbers he used and I found all match up to what is "correct" for it though. That used old belt is visually narrower and the number of it doesn't seem to match anything I've searched for in Google. The old used belt is marked clearly as 757713.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! 
Chase
205-368-5339
ihfarmallrtr@gmail.com


-
- Similar Topics
- Replies
- Views
- Last post
-
-
C123 WaterPump Update *Less than good*
by EZ » Thu Mar 10, 2016 1:17 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 692
-
by hammerhead
Sun Jan 08, 2017 9:04 pm
-
-
-
140 fan belt Attachment(s)
by jdeere86 » Fri Aug 26, 2016 8:35 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 262
-
by havoc1482
Sat Aug 27, 2016 3:00 pm
-
-
-
Fan belt replacement
by Lt.Mike » Wed Jul 04, 2018 10:23 am » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 179
-
by Lt.Mike
Wed Jul 04, 2018 1:11 pm
-
-
-
fan belt question Attachment(s)
by jdeere86 » Wed Oct 26, 2016 7:26 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 359
-
by SONNY
Mon Nov 21, 2016 8:14 pm
-
-
-
SA flat belt pulley
by staninlowerAL » Sat Jul 15, 2017 8:26 am » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 270
-
by AL Farmall Boy
Tue Jul 18, 2017 9:32 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests