Hello all, new member here

Post your introduction and "get to know me" information in this forum.
puddlejumper
Posts: 1
Joined: Sun Mar 07, 2021 10:46 am
Zip Code: 20646

Hello all, new member here

Postby puddlejumper » Tue Sep 21, 2021 7:15 pm

Hello all.

Joined some time ago and been lurking but haven't introduced myself. Long time collector of farm equipment. I recently purchased most of 3 cubs, and began putting together 2 good ones from the 3. My wife became interested and now one of the cubs is hers. We are currently working -together- on her first restoration. Hopefully not her last.

I am an all breeds lover, with a lean toward the green side but my wife has turned out to be red through and through!

I would like to hear some advice on the best paint to use. Spray bomb? Brush? 2 part? Epoxy?

Thanks for letting me join your forum. In the months I have been a member this forum has been a tremendous help. Especially with removing platforms, I have removed 2 of the 3 platforms, with one to go. I agree it isn't fun, but using the techniques I learned about here it was easier than I expected. And they were rusted BAD.

Dave
-Dave

1947 Cub
1948 Cub
1929 John Deere GP

User avatar
Pap
Cub Star!!
Cub Star!!
Posts: 357
Joined: Mon Jun 07, 2021 8:43 pm
Zip Code: 38401
Tractors Owned: 1947 Cub ( Err Err )
I could not say tractor when I was 2 years old so I called it Err Err.

I loved this tractor then and I still love it now.
Circle of Safety: Y
Location: Columbia, Tennessee

Re: Hello all, new member here

Postby Pap » Wed Sep 22, 2021 8:35 am

Welcome to the forum. Good luck with your project.
Are We Having Fun Yet ? :D
'47 cub ( Err Err )

Bob McCarty
Team Cub
Team Cub
Posts: 10887
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Hello all, new member here

Postby Bob McCarty » Wed Sep 22, 2021 9:10 am

Dave, welcome to the forum. My only comment on paint would be that if you want to use a hardener you must have supplied air. Otherwise, all the choices you listed are viable.
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 7271
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: Hello all, new member here

Postby Mike in Louisiana » Wed Sep 22, 2021 9:20 am

Welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers


Return to “Introduce Yourself”

Who is online

Users browsing this forum: staninlowerAL and 2 guests