What type of Farmall is it ?? Serial Number 3009 J

Tue Oct 17, 2006 5:01 pm

It looks like a 100. Can any confirm of deny?
The silver plate (serial numer is 3009 J
Image

Tue Oct 17, 2006 5:29 pm

Kuda, you have a 1955 Farmall 100. At least if it was mine that is what I would call it.

Tue Oct 17, 2006 5:46 pm

Thank-you Merlin
You have ended a debate between my brother and my dad

Rob :D

Tue Oct 17, 2006 7:21 pm

From what I see, it could just as easily be a '57 130. Get some casting date codes off of it to get the answer.

Tue Oct 17, 2006 8:16 pm

It certainally has a serial number that fits both. You're right, we need the casting codes. I'm sure its not a Super A though.

Tue Oct 17, 2006 8:48 pm

Jim Becker wrote:From what I see, it could just as easily be a '57 130. Get some casting date codes off of it to get the answer.


Here you go...


There is a casting number on the hydralic (?) under the gas tank: 357657R5

There is another casting number Transmission 351687-R8

Tue Oct 17, 2006 8:52 pm

Kuda - those are part numbers. Casting codes will appear as 10*17*A which is the month, day and a year code for when the piece was cast.

Like this:

http://www.tmtractor.com/id/id_004.htm

Tue Oct 17, 2006 8:59 pm

Those are part numbers. We need date codes. Follow this link http://www.tmtractor.com/id/id_004.htm to see what they look like. You may find them near the part numbers. The engine block may have one on the right side, low at the front. The final drives probably have them on the inner side.

Tue Oct 17, 2006 9:00 pm

Lets not all speak at once.

Tue Oct 17, 2006 9:03 pm

Thank you. The tractor is at my brothers barn. I will have to go over again or call him. It does have the 100 emblem on one side (the other side which I took the picture does not have the emblem any more). That would lead us to beleive it is a 100 but they and adhered with screws that do not look stock so it may have been changed. I will get numbers.

Rob

Thu Oct 19, 2006 10:09 pm

I have a number 36620 on the block behind the oil filter

I think I found the date code 2.7.A

Thu Oct 19, 2006 10:17 pm

Image

Thu Oct 19, 2006 11:03 pm

That would be Feb 7, 1955, which makes it a 100 like Merlin said, not a 130. I like to see more than one code, to guard against getting the code from a part that was replaced. But transmission housings hardly ever get changed.

Fri Oct 20, 2006 9:07 pm

Thank you Mr Becker and Merlin :D