New Member

How do I.... ?

Moderator: Team Cub

New Member

Postby Cub South » Fri Feb 21, 2003 11:04 am

Hello I just registered and want to let you know that when I find my first Cub I will probably need a lot of help. I have been a lurker for some time and since I have been into Cub Cadets for a while and now there is a special place for Cadets,thought I would go ahead and register. I now have two Cadets, a model 123 and a model 70 that I am rebuilding.I am looking for my first Cub to purchase. There are many down this way but I haven't found mine yet.Really enjoy the forum and guess I will have to try to keep Bama Club away if I find it.
Fix it right and you only have to redo one time.
Cub South
 
Posts: 3
Joined: Fri Feb 21, 2003 10:52 am
Location: Montgomery,Ala.

Postby Yo's Dad » Sat Feb 22, 2003 8:01 pm

Cub South:

Welcome, hope you find a nice cub soon. Keep lurking and ask anything, anytime you want. My first suggestion when you get your cub is to purchase an owners manual, service manual and parts manual. Then go to the FAQs section and read everything posted. Then you will really be ready to tackle that cub.
YD, Grover and Ole Malley
‘Keepers of the Flame’ Image
User avatar
Yo's Dad
Team Cub
Team Cub
 
Posts: 420
Joined: Mon Feb 03, 2003 9:22 am
Location: TN, Knoxville

Postby Jim Becker » Sat Feb 22, 2003 9:06 pm

You need to read the FAQ before you inspect a Cub for purchase. Then read it again after you buy one.
http://www.atis.net/CubFAQ/cub_faq.html
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11851
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y


Return to Message Board & Computer Questions

Who is online

Users browsing this forum: No registered users and 1 guest