Hydraulics on Farmall H

Farmall H, HV & Super H, 300 & 350, 1939-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
RonHarper
5+ Years
5+ Years
Cub Star!
Cub Star!
Posts: 228
Joined: Sun Jul 08, 2007 10:57 am
Zip Code: 74014
Location: Broken Arrow. Oklahoma

Hydraulics on Farmall H

Postby RonHarper » Sat Dec 15, 2007 9:09 pm

Can I install The lift all hydraulic setup on a 1948 Farmall H that does not have it, and if so what is required. Correct me if I have the term "lift all" incorrect. Also in my research, it seems that it mounts on the distributor drive.
1949 Cub S/N 95854 "Ellis"
" It's not the size of the tractor in the fight, but the size of the fight in the tractor ".

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sat Dec 15, 2007 9:11 pm

The liftall was the belly mount pump and resorvoir that ran off the transmission.. the one on the ditributor was a live hydraulic system.
If you are not part of the solution,
you are part of the problem!!!

User avatar
RonHarper
5+ Years
5+ Years
Cub Star!
Cub Star!
Posts: 228
Joined: Sun Jul 08, 2007 10:57 am
Zip Code: 74014
Location: Broken Arrow. Oklahoma

Postby RonHarper » Sat Dec 15, 2007 9:14 pm

What is the main difference between the two John, pros/cons
1949 Cub S/N 95854 "Ellis"

" It's not the size of the tractor in the fight, but the size of the fight in the tractor ".

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sat Dec 15, 2007 9:17 pm

dsistributor drive one is best, it is a live system, meaning anytime the engine is running the hydraulics work. On the liftall the clutch has to be up. I believe you will need the front casting and maybe timing gears form a Super H or 300 to use the distributer drive one though.
If you are not part of the solution,
you are part of the problem!!!

User avatar
RonHarper
5+ Years
5+ Years
Cub Star!
Cub Star!
Posts: 228
Joined: Sun Jul 08, 2007 10:57 am
Zip Code: 74014
Location: Broken Arrow. Oklahoma

Postby RonHarper » Sat Dec 15, 2007 9:36 pm

Great, so it's possible then, and practical, to add hydraulics to an H. Guess I am used to and like having the hydraulics on my '49 Cub. Would like to have hydraulics on this H if I do indeed purchase it, which I probably will.
1949 Cub S/N 95854 "Ellis"

" It's not the size of the tractor in the fight, but the size of the fight in the tractor ".

User avatar
RonHarper
5+ Years
5+ Years
Cub Star!
Cub Star!
Posts: 228
Joined: Sun Jul 08, 2007 10:57 am
Zip Code: 74014
Location: Broken Arrow. Oklahoma

Postby RonHarper » Sat Dec 15, 2007 9:38 pm

By the way John, being in Missouri, did you get any of the ice storm that devistated us here in Oklahoma? We were without power from Sunday evening till Friday evening. Did not realize how much I liked modern convienence till last week!
1949 Cub S/N 95854 "Ellis"

" It's not the size of the tractor in the fight, but the size of the fight in the tractor ".

User avatar
KETCHAM
10+ Years
10+ Years
501 Club
501 Club
Posts: 5635
Joined: Thu Jul 28, 2005 2:37 pm
Zip Code: 44645
eBay ID: kevinb2366
Tractors Owned: 47 Cub 48 Cub 50 H
Location: Marshallville Ohio

Postby KETCHAM » Sat Dec 15, 2007 10:50 pm

Sorry to hear about the no power!!!I have a belly pump on my 50 H.I hope to put it to use on my cultivators this spring.Kevin :D :D
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!

SONNY
10+ Years
10+ Years
501 Club
501 Club
Posts: 2596
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Postby SONNY » Sat Dec 15, 2007 11:11 pm

My H has the belly pump also, and its better than nothing!--it depends mostly what you need to use the hyd's for! thanks; sonny

brian kov
10+ Years
10+ Years
501 Club
501 Club
Posts: 1002
Joined: Fri Dec 02, 2005 11:16 am
Location: wampum pa (western )

Postby brian kov » Sun Dec 16, 2007 12:21 pm

my h has a belly pump and i just bought a 3 pt hitch set up is the belly pump gonna work for powering the 3 pt . :oops:
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Dec 16, 2007 1:53 pm

It will work, but the belly pump hydraulic system is low pressure(600 to 1000p0unds depending on age and condition), so it will be limited in what it can lift.
If you are not part of the solution,
you are part of the problem!!!

brian kov
10+ Years
10+ Years
501 Club
501 Club
Posts: 1002
Joined: Fri Dec 02, 2005 11:16 am
Location: wampum pa (western )

Postby brian kov » Sun Dec 16, 2007 2:35 pm

i guess i will have to see once i get thehitch installed
1955 intrnational lo-boy w/ fasthitch, 1960 farmall cub w/fathitch .fasthitch moleboard ,disk,carryall rotovator,54a blade,I.H. 1ooo loader , Syms all wheather cab. PROUD MEMBER OF THE 500 CLUB LO-BOY THAT IS . 1972 154 lo boy

SONNY
10+ Years
10+ Years
501 Club
501 Club
Posts: 2596
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Postby SONNY » Sun Dec 16, 2007 4:22 pm

Dont know what pressure mine is, (probably low), but at one time it had a Horn Hyd. loader on it and worked fine, so I would think a 3-pt should be ok too.--does your 3-pt have 1 or 2 hyd. cylinders on it? ---the one I put on my Super M-D,and later switched to the 560 has 2 cylinders on it, that also makes a difference! thanks; sonny

WKPoor
5+ Years
5+ Years

Postby WKPoor » Mon Dec 17, 2007 6:14 pm

I have an H with the live hyd mod. I also operated my H for a couple of yrs with a Saginaw 3pt and the liftall. It will work fine on the liftall and lift absolutely anything you want. No limits there at all. If you go that way there are some plumbing details to make it fully functional. If you elect to go live (approx. cost $300-$400) you can make the H as versital as a new tractor. Mine currently has the live power, dual remotes, and a power top link. The hitch also has down pressure. Its a great setup!

TJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 291
Joined: Sun Dec 10, 2006 10:43 am
Zip Code: 72455
Location: AR. Pocahontas

Postby TJ » Mon Dec 17, 2007 9:10 pm

Ron I didn't see this post until after i wrote thishttp://farmallcub.com/phpBB2/viewtopic.php?t=26930&start=15
Its in your other post.
1972int.cub , c-3 int mower , 54a blade
1950 M farmall "under construction"

If a word is misspelled in the dictionary who would know? from uncle johns bathroom reader

WKPoor
5+ Years
5+ Years

Postby WKPoor » Wed Dec 19, 2007 10:56 pm

Here are a few pics of the hydraulic setup.
Image
Image
Image
Image


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 0 guests