PTO shifter lever repair

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
farmer.boy
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 66
Joined: Tue Apr 29, 2003 10:18 am
Location: Al, Huntsville

PTO shifter lever repair

Postby farmer.boy » Mon Mar 15, 2004 11:51 am

The nub on this PTO lever is sheared in half just like the pic on TM's web site. I'm thinking I can make a new nub by turning a shoulder on a piece of round stock then press out the old one and replace it with my newly turned piece. I am wondering if it will wiggle out and cause trouble?
thanks!
Stanley

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Postby Bigdog » Mon Mar 15, 2004 11:53 am

That stub is hardened steel. If you make one, you can use an old drill bit shank and weld it in. Good used replacements are available reasonably priced.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

Oscar Meier
10+ Years
10+ Years
Cub Star!
Cub Star!
Posts: 237
Joined: Wed Jul 09, 2003 11:03 am
Location: Danville, Indiana

Postby Oscar Meier » Mon Mar 15, 2004 2:01 pm

I just got one from Wenger's last summer and it was about $20.00
48 CUB & 52 Super A

User avatar
Peter S
10+ Years
10+ Years
Posts: 47
Joined: Fri Jul 18, 2003 11:24 am
Zip Code: 01085
Tractors Owned: 1951 cub
1963 cub
Location: Massachusetts, Westfield

Postby Peter S » Thu Mar 18, 2004 12:05 pm

When I repaired mine, I used the non threaded portion of a socket head cap screw and had it welded in place. Its been working fine for two years.
Peter

1951 Cub, 1963 Cub

User avatar
Merlin
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 940
Joined: Mon Feb 03, 2003 8:06 am
eBay ID: merlin582
Location: Ponchatoula, La.

Postby Merlin » Thu Mar 18, 2004 2:06 pm

I have repaired a few using Bigdog's method but I make them 1/8" longer than original where it will extend into the collar a little further.


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 3 guests