Farmall M pto shaft

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
dw
10+ Years
10+ Years
Posts: 38
Joined: Fri Dec 09, 2005 11:43 pm

Farmall M pto shaft

Postby dw » Fri Mar 28, 2008 1:21 pm

Can the pto shaft be installed without having to remove the seat and floor plate? What holds it in, the outside bearing and seal?

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 21527
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Fri Mar 28, 2008 2:38 pm

I am not real familiar with the M, but I believe it all goes in from the rear, no need to pull the seat so far as I know.
If you are not part of the solution,
you are part of the problem!!!

RustyFarmall
5+ Years
5+ Years
Posts: 173
Joined: Fri Nov 16, 2007 4:14 pm
Zip Code: 51646
Location: New Market, Iowa

Postby RustyFarmall » Sat Mar 29, 2008 8:50 am

Yes, the whole assembly goes in from the rear.


Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 0 guests