Will this mower attach to a fast hitch regular cub?

Sat Apr 05, 2008 10:26 pm

Image

Also, is there a manual out there for one of these? It is an IH 5 ' mower

Sun Apr 06, 2008 7:03 am

Dan:

I am not sure which mower you have. Danco made 2 60" mowers for the Cub that I know of from the manuals. If it is the IH Danco C-3 60" Mower then the answer would be yes.. there is a manual for the C-3 on the server IH Danco C-3 Mower. The Cub with Fast-Hitch mounting instructions aret here also.

However, since the one shown is missing the rear mounting bars, could this be a C-1? If so, then there is also a
2 different C-1 Rotary Mower Manuals and the Fast Hitch instructions are there as well. The forum software doesn't like the link but it is in the Implements Index.

Hope this helps a bit.
Last edited by Rudi on Sun Apr 06, 2008 2:25 pm, edited 1 time in total.

Sun Apr 06, 2008 9:40 am

The mount and drive hardware is what makes the fast hitch mower different because the fast hitch interferes with the standard mower hardware. The mower decks are essentially the same so you need to examine the accessories to know which machine to deck attaches to. This being said, are you sure the deck is actually designed for a Cub?

Sun Apr 06, 2008 7:30 pm

Thanks guys. This came off a Cub. Here is the pics of the other parts.

Image

Sun Apr 06, 2008 7:37 pm

Dan:

I am no expert.. but looks to me like the C-3. You may need different mounting brackets to mount up with a Fast-Hitch.. but the manual has all of that.

Sun Apr 06, 2008 7:46 pm

The PTO pulley looks like the one on a 154 cub

Sun Apr 06, 2008 8:18 pm

David:

I finally found my IH 3160 Rotary Mower Manual.. and looking at it, the pulley is similar, but the rear mule drive is not at all, and the deck itself does not resemble the one in Clem's pics. Also the mounting bars are straight and not curved like the 3160. Gotta check the 3260 manual.. but I think it probably is the C-3 :?: :?:

Sun Apr 06, 2008 9:05 pm

thank you for all the help

mower

Sun Apr 06, 2008 9:16 pm

none of the mule drive parts are for any c-1, c-2, or c-3 ih danco decks maybe the deck is not a ih one can you post pics with the shield removed or the back side of the deck

Sun Apr 06, 2008 10:11 pm

Looks just like the Kub clipper I had on my demo. I remember the big guard. It's to big of a mower for a cub, it's also way way to heavy. It would work well under a super a.