Big Bill I have the same 14.9x24's you have on this tractor. I put them on 15" wide rims. But if I did it agin I would put it on 12" wide rims. You Can get them from Miller and get the lug locks and weld them on the rim.
Billy
Mowin' agin!!!!
Moderator: Team Cub
7 posts
• Page 1 of 1
Mowin' agin!!!!
by cowboy » Sun Aug 03, 2008 8:31 pm
Well its not the cub but I am mowing again. The 130 back together but its not right yet. Steering gear box needs to be rebuilt. Its three times as loud as the 100 has low power and oil pressure. But I can mow some with it. I have the fasthitch mott mower I got from Clark T on it. It works needs new knives like he said it did. And I really need to figure out how to setup the hitch and bail. I have it all jacked out of shape to make it work but it does. I am pretty sure its that water pipe in front that somone rigged up to hole the front bail. But I will get it right sooner or later. But I got the horse pasture knocked down
Big Bill I have the same 14.9x24's you have on this tractor. I put them on 15" wide rims. But if I did it agin I would put it on 12" wide rims. You Can get them from Miller and get the lug locks and weld them on the rim.
Billy
Big Bill I have the same 14.9x24's you have on this tractor. I put them on 15" wide rims. But if I did it agin I would put it on 12" wide rims. You Can get them from Miller and get the lug locks and weld them on the rim.
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
cowboy - Cub Pro
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Location: MI, Britton
- Zip Code: 49229
Re: Mowin' agin!!!!
by beaconlight » Mon Aug 04, 2008 2:23 am
Good to see you back on. They look like flotation tires on there.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
beaconlight - Cub Pro
- Posts: 7679
- Joined: Thu Aug 19, 2004 2:31 pm
- Location: NY Staten Island & Franklin
- Zip Code: 10314
Re: Mowin' agin!!!!
by PageRob » Mon Aug 04, 2008 10:10 am
Nice. Those are some seriously wide rear tires there indeed!
"The only thing we did was wrong was stay in the wilderness too long/the only thing we did was right was the day we started to fight."
-Old Spiritual
-Old Spiritual
-
PageRob - 501 Club
- Posts: 888
- Joined: Sun Jan 21, 2007 5:05 pm
- Location: Page, Az.
- Zip Code: 86040
- Tractors Owned: 1948 Farmall Cub "Black Cat"
Mamod TE1A "Kayenta"
Re: Mowin' agin!!!!
by Pony Master » Mon Aug 04, 2008 10:43 am
Lookin good Cowboy! It doesn't look like you will have to worry about getting stuck with those tires.
1947 Circle Cub, 193, 189
1954 Cub w/FH, IH100, 194, F11
1956 Cub Loboy w/FH and 194
1960 Cub Loboy w/FH and L-54
1953 Super A, 2 seater B, Avery V, Avery A, JD M, MH Pony, Leader D, Allis Chalmers C, and my Great Grandpa's ZA Minneapolis Moline.
1954 Cub w/FH, IH100, 194, F11
1956 Cub Loboy w/FH and 194
1960 Cub Loboy w/FH and L-54
1953 Super A, 2 seater B, Avery V, Avery A, JD M, MH Pony, Leader D, Allis Chalmers C, and my Great Grandpa's ZA Minneapolis Moline.
-
Pony Master - 501 Club
- Posts: 3023
- Joined: Thu Nov 15, 2007 10:39 am
- Location: IL, Greenville
- Zip Code: 62253
- Circle of Safety: Y
Re: Mowin' agin!!!!
by Rudi » Mon Aug 04, 2008 11:32 am
Billy:
Glad you got one running again. Hope the Cub gets fixed soon. Have some fun, and enjoy... looks like a nice day and some decent seat time.. at least is is on an IH...
Glad you got one running again. Hope the Cub gets fixed soon. Have some fun, and enjoy... looks like a nice day and some decent seat time.. at least is is on an IH...
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
-
Rudi - Team Cub
- Posts: 27193
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC - Circle of Safety: Y
Re: Mowin' agin!!!!
by Cub parts man » Mon Aug 04, 2008 11:57 am
Those mott mowers do a good job with tall grass like that.
- Cub parts man
- 501 Club
- Posts: 582
- Joined: Sun Feb 27, 2005 3:08 pm
- Location: Sykesville, Md.
Re: Mowin' agin!!!!
by KETCHAM » Mon Aug 04, 2008 12:14 pm
I think that with new knives you would get a better cut out of that mower.Mine on my cub does a great job.Kevin them are some fat tires!!!!! 
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5459
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
7 posts
• Page 1 of 1
Return to Farmall 100 Series, 100, 130, 140
Who is online
Users browsing this forum: No registered users and 0 guests
|
|