Super C and 240 wide front

Farmall C, Super C Tractors, 200 & 230 1948-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Paul B
10+ Years
10+ Years
501 Club
501 Club
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Super C and 240 wide front

Postby Paul B » Mon Aug 25, 2008 3:31 pm

This question was asked on another forum I am a member of, and so far no one has an answer. Is the wide front end on a "C"/Super "C" and a 240 the same, and will they swap out??

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Super C and 240 wide front

Postby Jim Becker » Mon Aug 25, 2008 5:21 pm

The answer is "no" and "maybe".

The wide front for the C through 230 are the same, or close enough for all practical purposes. It has a wish-bone support that is integral with the axle center section and pivots on the same pin as the axle. The 240 wish bone is a separate part and pivots in a ball socket under the bell housing. A 240 axle wouldn't be good on the earlier tractors. The bolster is a different part number on the 240 than the other models as well, so I don't know if the earlier axle will work on a 240 or not.

This is all relative to the Farmall 240. A 240 Utility is another beast completely.

Paul B
10+ Years
10+ Years
501 Club
501 Club
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Re: Super C and 240 wide front

Postby Paul B » Mon Aug 25, 2008 6:57 pm

Thanks Jim, I passed your reply on to the original question poster.


Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 0 guests