Super C Update (w/pics)

Farmall C, Super C Tractors, 200 & 230 1948-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Harold R
Team Cub Guide
Team Cub Guide
Posts: 3265
Joined: Thu Feb 20, 2003 4:54 pm
Zip Code: 71203
Tractors Owned: 1948,50,55, and 56 Farmall Cubs
1969 International Cub, and they're all running, working tractors.
Circle of Safety: Y
Location: Louisiana

Super C Update (w/pics)

Postby Harold R » Wed Oct 22, 2008 8:12 am

When I left off last time, I had the sleeves out, but the pistons were stuck in them and the shop press didn't work any magic. I took the angle grinder as someone suggested, put a seam down the side of the sleeve, and where the piston wasn't, cut all the way through. Then I took a chisel to the seam and she split open. Just enough to where the pistons tapped out easily.
http://photos.cubfest.com/displayimage.php?album=lastupby&cat=0&pos=3&uid=314

I believe these pistons are the "fire-crater" brand from I/H. There are part numbers on the top, but I can't find the size. Does it mean "standard" when there is no size???

http://photos.cubfest.com/displayimage.php?album=lastupby&cat=0&pos=2&uid=314

I decided to power wash the front wheel pedestal. Under all the dirt was a lot of original red paint. I was suprised to see how much dirt and gunk was held in the bolster area though. On a good note, the steering seemed not to have much slack and the front wheel bearings were tight and made no noise at all. I'm hoping those little u-joint connecters are still available.....those were shot!
http://photos.cubfest.com/displayimage.php?album=lastupby&cat=0&pos=1&uid=314

User avatar
Super A
10+ Years
10+ Years
Posts: 4101
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety: Y
Location: NC, Jacksonville area

Re: Super C Update (w/pics)

Postby Super A » Thu Oct 23, 2008 8:11 am

I'm pretty sure that the part number will tell you the size--each size had a different numbe.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.

User avatar
phildidit
5+ Years
5+ Years
Posts: 1627
Joined: Mon Jan 29, 2007 7:09 pm
Zip Code: 30114
Tractors Owned: 1951 cub "Ms. Scarlett"
1962 Leora's loboy "Starburst"
Circle of Safety: Y
Location: GA, Canton/Waleska

Re: Super C Update (w/pics)

Postby phildidit » Sat Oct 25, 2008 9:33 am

looks like a job ahead of you, looks fun though.

User avatar
artc
Cub Pro
Cub Pro
Posts: 1840
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.
Location: CT, Middletown

Re: Super C Update (w/pics)

Postby artc » Sun Nov 02, 2008 5:21 pm

typically, no numbers like 20, .30, etc indicates a std piston on a bore in block engine, like the cub. sometimes, if a piston was not marked, old time mechanics would prick punch dots, each dot representing .010 oversize.
because you have a sleeved engine, when the sleeves are worn you would replace them along with rings and generally pistons, and therefor the engine would still have std pistons regardless of the number of times it was rebuilt.
H's, however, all get over size super H sleeve kits 1/16" larger diameter, if i remember right.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org

User avatar
Super A
10+ Years
10+ Years
Posts: 4101
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety: Y
Location: NC, Jacksonville area

Re: Super C Update (w/pics)

Postby Super A » Sun Nov 02, 2008 6:40 pm

artc wrote:H's, however, all get over size super H sleeve kits 1/16" larger diameter, if i remember right.


Same way here. Super A's usually got "Super C" kits. I think you could go all the way to a 3 1/4?? piston with no block mod's. The thickness of the sleeve varied. You could go even bigger but then you had to bore the block to accept a bigger sleeve.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.


Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 0 guests