Farmall 200

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Farmall 200

Postby Paul B » Mon Apr 13, 2009 4:51 pm

Can someone tell me what the Owners/Operator Manual specifies to use as the lubricant in the transmission/rear-end of a Farmall 200, and the quanity. Thanks in advance.
Paul B
Team Cub Guide
Team Cub Guide
 
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Location: KY, Louisville
Zip Code: 40218
Circle of Safety Award
Circle of Safety: Y

Re: Farmall 200

Postby Jim Becker » Mon Apr 13, 2009 10:05 pm

I don't have a reference for the 200. It was in the middle of the succession of similar models C - Super C - 200 - 230 - 240 - 404. The early ones would have been factory filled with SAE 90 gear oil and the later ones with Hy-Tran. I don't know whether the switch was done by the time the 200 came along. Since the 200's Touch-Control had a separate reservoir, the transmission would be OK with either type. For the 240, the book calls out 4 3/4 gallons of Hy-Tran without PTO/pulley, 5 gallons with. The 200 would have to be close to the same. The level plug is on the right side, at the very rear.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11850
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y


Return to Farmall / IH / CASE

Who is online

Users browsing this forum: No registered users and 1 guest