Thu Apr 30, 2009 9:06 pm
I have stumbled accross a 300U that has been sitting for a while and has some issues. First and foremost is a stuck transmission. I removed the shifter tower and the rails will move back and forth, but the tranny is still stuck. I am guessing I will have to remove the rather large cover to access the gears. Other that nasty oil, what should I look for or expect to find in there. It has a S serial number suffix, which I think means equiped with TA an IPTO. Other than a couple emblems and lights missing, it appears to be complete.
Any insight you guys could give me would be appreciated. Thanks in advance.
Thu Apr 30, 2009 9:54 pm
TA lever will be on the left side in front of your knee----lpto (if equipped) ,will be alongside the seat and could be on either side.-----the suffix means that the tractor has provisions for them,--but someone may have ordered the tractor without them!
See if all the gears will slide along the spline shafting in the transmission.---they could be rusted to the splines and will have to be loosened up before you can get it into neutral thanks; sonny
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.