Rubber Washers

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
EZ
10+ Years
10+ Years
501 Club
501 Club
Posts: 1058
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Rubber Washers

Postby EZ » Tue May 26, 2009 8:08 pm

I was looking at replacing the rubber washers on the transmission drive shaft joint on my 130.

There are 8 required. Part#43550

No longer available says CASE IH.

Any ideas on aftermarket, or suitable replacements?

Thanks,
Ed
Just Do It !

WKPoor
5+ Years
5+ Years

Re: Rubber Washers

Postby WKPoor » Sun May 31, 2009 8:11 am

Look in McMaster Carr catalog.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21534
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Rubber Washers

Postby John *.?-!.* cub owner » Sun May 31, 2009 8:53 am

Ed, have you actually called a dealer rather than just looking up on line? I have had a lot of problems with parts saying not available when I looked them up on websites, but were still available. Sometimes the part number had changed, sometimes there was a difference in the way the number was entered (spaces, hyphens, etc.).
If you are not part of the solution,
you are part of the problem!!!

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Rubber Washers

Postby Jim Becker » Sun May 31, 2009 10:44 am

Yeah, what John said. You left the "D" off the part number. It is 43550D.

User avatar
EZ
10+ Years
10+ Years
501 Club
501 Club
Posts: 1058
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Rubber Washers

Postby EZ » Sun May 31, 2009 9:39 pm

Thanks guys,

I'll try that with the D when I call the CNH dealer again.
Just Do It !

BigBill
10+ Years
10+ Years
501 Club
501 Club
Posts: 6043
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Rubber Washers

Postby BigBill » Sat Jun 06, 2009 6:06 pm

Have you tried ebay???

Can one be made from a mudflap?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

User avatar
EZ
10+ Years
10+ Years
501 Club
501 Club
Posts: 1058
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Rubber Washers

Postby EZ » Sun Jun 07, 2009 11:44 am

Bigbill,

No I did not think of Ebay. Hmmmmmmmmmm.....

Mudflap sounds like a great idea. What can be so special about 8 rubber washers?

I suppose thickness, and elasticity are the biggest factors.
Just Do It !

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21534
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Rubber Washers

Postby John *.?-!.* cub owner » Sun Jun 07, 2009 3:35 pm

EZ wrote:Bigbill, What can be so special about 8 rubber washers?
They have to be strong enough to stand the torque of the engine, the bolts actually push against them, using them like shock absorbers.
If you are not part of the solution,
you are part of the problem!!!

User avatar
Bus Driver
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 2901
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Rubber Washers

Postby Bus Driver » Sun Jun 07, 2009 5:21 pm

Rubber hardness is measured by durometer, the higher the number, the harder the rubber. Rubber changes durometer somewhat as it ages, thus a used part might not have the same properties as new. If scarcity of these parts appears to be near, it would be very useful if the person finding a new one would take it to a commercial/industrial rubber supplier for identification of the durometer and other characteristics. Such suppliers can get equivalent material and cut it to any shape/size required. The specifications would be most welcome for my records.
Luck favors those who are prepared

Phillip W. Lenke
10+ Years
10+ Years
501 Club
501 Club
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: Rubber Washers

Postby Phillip W. Lenke » Mon Jun 15, 2009 11:30 am

joes farmall has them www.joesfarmall.com
Phil
"Work Hard ,Play Often,Care Always"


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 2 guests