Farmall M Belt Pully

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Phillip W. Lenke
10+ Years
10+ Years
501 Club
501 Club
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Farmall M Belt Pully

Postby Phillip W. Lenke » Wed Jun 17, 2009 7:57 am

Would like to know the diameter that came standard for a 1940 Farmall M
Thanks
Phil
"Work Hard ,Play Often,Care Always"

User avatar
KETCHAM
10+ Years
10+ Years
501 Club
501 Club
Posts: 5635
Joined: Thu Jul 28, 2005 2:37 pm
Zip Code: 44645
eBay ID: kevinb2366
Tractors Owned: 47 Cub 48 Cub 50 H
Location: Marshallville Ohio

Re: Farmall M Belt Pully

Postby KETCHAM » Wed Jun 17, 2009 8:00 am

Should be the same as my H.They had paper and steel ones,differnt diameters.Range in price $25.00 up!!! I'll measure mine tonight.Kevin :twisted: :twisted:
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!

Phillip W. Lenke
10+ Years
10+ Years
501 Club
501 Club
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: Farmall M Belt Pully

Postby Phillip W. Lenke » Wed Jun 17, 2009 8:05 am

Thanks
"Work Hard ,Play Often,Care Always"

User avatar
Dusti Snider
10+ Years
10+ Years
501 Club
501 Club
Posts: 599
Joined: Tue Feb 04, 2003 9:10 am
Zip Code: 24740
Tractors Owned: 1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1934 Farmall F-12
1929 Farmall Regular
1956 Ford 640
1967 John Deere 112H
1973 John Deere 140H3
1985 John Deere 420
Circle of Safety: Y
Location: Mercer County, West Virginia

Re: Farmall M Belt Pully

Postby Dusti Snider » Wed Jun 17, 2009 4:05 pm

Phil,
I don't know that you could call one "standard", but probably the 11" if I were guessing. I know that the steel and paper pulleys came in the same 5 sizes: 6-1/2", 9-3/4", 11", 12", and 13"
Dusti
Image

Member IHCC Chapter 37 & 42 - North Carolina

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Farmall M Belt Pully

Postby Jim Becker » Wed Jun 17, 2009 8:03 pm

M came with an 11 inch pulley. The H and M pulleys run at different speeds, therefore they normally have different sized pulleys to get similar belt speeds.

The H belt pulley runs 1019 rpm. With the regular 9 3/4 x 7 1/2 inch pulley, the belt speed is 2601 fpm.
The M belt pulley runs 898 rpm. With the regular 11 x 7 1/2 inch pulley, the belt speed is 2587 fpm.

User avatar
KETCHAM
10+ Years
10+ Years
501 Club
501 Club
Posts: 5635
Joined: Thu Jul 28, 2005 2:37 pm
Zip Code: 44645
eBay ID: kevinb2366
Tractors Owned: 47 Cub 48 Cub 50 H
Location: Marshallville Ohio

Re: Farmall M Belt Pully

Postby KETCHAM » Wed Jun 17, 2009 8:52 pm

Yep 9 3/4" inch on mine.I see others kicked in on better anwsers!! Hope to see ya this weekend!!! Kevin :mrgreen: :mrgreen:
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!


Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 0 guests