Super C clutch details

Farmall C, Super C Tractors, 200 & 230 1948-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Beestingz
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 58
Joined: Mon Apr 14, 2003 7:28 am
Zip Code: 04474
Tractors Owned: 49 Cub
Location: Orrington, Maine

Super C clutch details

Postby Beestingz » Fri Aug 28, 2009 5:04 pm

We had to replace the clutch on the Super C. Now that its back together, we're finding the clutch won't engage. It seems like everything is back to normal. Hoping that someone might be able to scan a couple pages from the service manual to see if we did something wrong or maybe we just need to adjust the clutch linkage. Your thoughts are welcome.

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12161
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Super C clutch details

Postby Jim Becker » Fri Aug 28, 2009 8:45 pm

Did you install a new pressure plate? Did it come with the 3 bolts that compress the springs and pull the pressure plate back towards the cover? Did you remove the 3 bolts after bolting the pressure plate to the flywheel?

Beestingz
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 58
Joined: Mon Apr 14, 2003 7:28 am
Zip Code: 04474
Tractors Owned: 49 Cub
Location: Orrington, Maine

Re: Super C clutch details

Postby Beestingz » Sat Aug 29, 2009 3:34 pm

Interesting questions.... I was there to disassemble the tractor and the clutch fingers were broken. The mechanic at the shop tightened down to clutch plate to specs for us. I'll have to ask my brother if the bolts were removed. I guess it makes sense. Thats one way of learning.

User avatar
artc
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 1840
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.
Location: CT, Middletown

Re: Super C clutch details

Postby artc » Sun Aug 30, 2009 11:19 pm

if the clutch disk wasn't in contact with the pressure plate and flywheel during the installation of the engine, then the disk would be loose within the pressure plate cavity and make it nearly impossible to line up the spline / pilot bushing. or am i missing something with the bolts you are describing Jim?

so i'm thinking you must be way out of adjustment from trying to adjust the old clutch disk.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org

Beestingz
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 58
Joined: Mon Apr 14, 2003 7:28 am
Zip Code: 04474
Tractors Owned: 49 Cub
Location: Orrington, Maine

Re: Super C clutch details

Postby Beestingz » Tue Sep 08, 2009 4:51 pm

If there are 2 different plates available do each require different throwout bearings?


Return to “Farmall C, Super C, 200 & 230”

Who is online

Users browsing this forum: No registered users and 0 guests