farmall h missing

Farmall H, HV & Super H, 300 & 350, 1939-1958

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
zack
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 122
Joined: Fri Jan 06, 2006 9:48 pm
Location: Grand Haven, Michigan

farmall h missing

Postby zack » Sun Sep 13, 2009 4:17 pm

I am having problems with my h. When its first started It runs a little rough but not too bad. Then as it warms up it starts to miss and pop out of the exhaust.
At full throttle the miss is still there but is a little but harder to hear. once warm at idle it misses, pops, and lopes. You can pull the choke out and you can get it to run fairly smooth. It seems to me to be running lean but I am no expert.

I have been working on this for a few days and I am pretty well stumped.

Now for a little backgound, I have had this tractor for about a year and it has always had a very slight miss. I bought it from a guy who said he could never get it to run right so he parked it. I think this miss is what he was talking about.

Two days ago I thought I would change the short piece of pipe coming out of the manifold with a longer one. So with a lot of heat, pounding, and a big pipe wrench I got it out. Now sense I put the new pipe and muffler that miss has gotten a lot worse.

Sense then I have cleaned the carb 3 times, checked the points 2 times, cleaned the cap and rotor, and checked the timing. I even rigged up another small tank that I know is clean.

One other thing, I can unscrew the main jet ( the one on the bottom of the carb) until it almost falls out. But it still does not seem to get to the point of running to rich. unless I use the choke

I am not sure if working on the manifold with the heat and everything may have opened up a crack or hole causing it to run lean. Or if the carb is the problem,maybe spark it has a mag on it, or possibly something else I have not thought of.

So if anyone has an idea let me know. Because I am not sure what to do next.

Thanks for any help
Zack

Eugene
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 15055
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: farmall h missing

Postby Eugene » Sun Sep 13, 2009 5:25 pm

Run compression test - looking for uneven cylinder compression.
Conduct a vacuum check. This will help isolate the problem area(s).

Mag. Weak or faulty ignition system. Someone didn't reassemble correctly.
Bad spark plug wires.

Just throwing out thoughts.
I have an excuse. CRS.

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: farmall h missing

Postby Bigdog » Sun Sep 13, 2009 7:25 pm

Possibly a sticking valve. Eugene's suggested diagnostics should tell the story.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

zack
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 122
Joined: Fri Jan 06, 2006 9:48 pm
Location: Grand Haven, Michigan

Re: farmall h missing

Postby zack » Sun Sep 13, 2009 8:23 pm

I forgot to let you know I checked the compression and I got
1=107
2=110
3=110
4=110
I thought that wasn't too bad

Is there an easy way to tell if the mag is weak or there issome thing wrong with it, this is my first experience with a mag.

Could you give me a quick run down on how to do a vacum test and what to look for?
Thanks for the help so far

cubbrian
5+ Years
5+ Years
501 Club
501 Club
Posts: 802
Joined: Sun Apr 08, 2007 7:47 pm
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor
Location: IN, New Harmony

Re: farmall h missing

Postby cubbrian » Sun Sep 13, 2009 8:29 pm

You might check the carb. float for a crack. Mine had a very small crack and it caused the fuel level to be off and caused what seemed to sound like a miss.

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: farmall h missing

Postby Bigdog » Sun Sep 13, 2009 8:40 pm

If you suspect an intake manifold leak use an unlit propane torch and move it around the manifold at all junctions and mating surfaces. If it smooths out you've found your leak.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

zack
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 122
Joined: Fri Jan 06, 2006 9:48 pm
Location: Grand Haven, Michigan

Re: farmall h missing

Postby zack » Sun Sep 13, 2009 8:49 pm

I put a new float in the carb about two months ago.

I will have to try the propane torch trick tomorrow and see what happens

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: farmall h missing

Postby Bigdog » Sun Sep 13, 2009 8:56 pm

Since your problem is worse after the engine warms up - run your propane test on a warm engine. You might also consider re-running your compression test after the engine is warm.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

zack
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 122
Joined: Fri Jan 06, 2006 9:48 pm
Location: Grand Haven, Michigan

Re: farmall h missing

Postby zack » Sun Sep 13, 2009 9:10 pm

I will recheck the compression when it is warmed up.

Eugene
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 15055
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: farmall h missing

Postby Eugene » Sun Sep 13, 2009 9:58 pm

http://www.performanceprobe.com/index2. ... s/imvt.php

Search vacuum testing automobile - lots of hits telling you hwo to do it and what each reading means.
I have an excuse. CRS.

zack
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 122
Joined: Fri Jan 06, 2006 9:48 pm
Location: Grand Haven, Michigan

Re: farmall h missing

Postby zack » Wed Sep 16, 2009 8:34 am

Thanks for all the help everyone. The problem was a bad intake gasket, I put a new one in last night and it seemed to run great.


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 1 guest