Offset tricycle?

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Song
5+ Years
5+ Years

Offset tricycle?

Postby Song » Mon Feb 15, 2010 4:45 pm

Was there ever such a beast? I think I have seen, what I thought, was one but not sure about it.

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: Offset tricycle?

Postby Bigdog » Mon Feb 15, 2010 4:55 pm

Terry - someone had a B that they replaced the left final drive and axle extension with the final from an A. This resulted in an offset narrow front / narrow rear B. It looked really unstable to me and I would hesitate to operate it on any kind of incline.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
gitractorman
10+ Years
10+ Years
Posts: 2429
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: Offset tricycle?

Postby gitractorman » Mon Feb 15, 2010 6:30 pm

Terry,
I always referred to the Farmall B as an "offset tricycle". Technically, the engine is centered between the rear wheels, but the seat, steering, and foot pedals are offset, just like a Farmall A.

Image
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 21529
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Offset tricycle?

Postby John *.?-!.* cub owner » Mon Feb 15, 2010 9:24 pm

I have come across a couple of B/A crosses that were for sale, and the sellers were claiming they were factory. I did not call them a liar to their face, but strongly hinted I did not believe them. Both of them showed evidence of having been rolled.
If you are not part of the solution,
you are part of the problem!!!

vdeal
5+ Years
5+ Years
Posts: 44
Joined: Thu Jun 11, 2009 11:26 am
Zip Code: 26542
Tractors Owned: Case 1290
BCS 720 Harvester
Location: WV, Masontown

Re: Offset tricycle?

Postby vdeal » Wed Mar 03, 2010 2:25 pm

If by "offset" you're referring to the Culti-Vision system then the following were available with it: Cub, A, Super A, 100, 130, 140 and B. Don't think I missed any. The B is the only one that I know of that came from the factory with a tricycle front end.
"If America could be, once again, a nation of self-reliant farmers, craftsmen, hunters, ranchers, and artists, then the rich would have little power to dominate others. Neither to serve nor to rule:That was the American dream." -- Edward Abbey

SONNY
10+ Years
10+ Years
Posts: 2596
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Re: Offset tricycle?

Postby SONNY » Wed Mar 03, 2010 5:41 pm

Ford also had a small offset, and not sure but the Oliver 44 may have been this style. thanks; sonny

vdeal
5+ Years
5+ Years
Posts: 44
Joined: Thu Jun 11, 2009 11:26 am
Zip Code: 26542
Tractors Owned: Case 1290
BCS 720 Harvester
Location: WV, Masontown

Re: Offset tricycle?

Postby vdeal » Thu Mar 04, 2010 10:51 am

The seat on the Oliver Super 44 did set off to one side but not as much as Farmall's Culti-Vision tractors. Not sure which Ford would have had this offset. However, I don't believe the Oliver came in a tricycle configuration and I don't know of any Ford's that did.
"If America could be, once again, a nation of self-reliant farmers, craftsmen, hunters, ranchers, and artists, then the rich would have little power to dominate others. Neither to serve nor to rule:That was the American dream." -- Edward Abbey

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: Offset tricycle?

Postby Bigdog » Thu Mar 04, 2010 11:40 am

Offset Ford 541 - Photo courtesy of Soundguy via YTMag site:

Image
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

vdeal
5+ Years
5+ Years
Posts: 44
Joined: Thu Jun 11, 2009 11:26 am
Zip Code: 26542
Tractors Owned: Case 1290
BCS 720 Harvester
Location: WV, Masontown

Re: Offset tricycle?

Postby vdeal » Thu Mar 04, 2010 1:11 pm

Thanks Bigdog,

Didn't know about the 541. Apparently the Ford 501 was also offered in an offset and there were some Ford Hundred series tricycle style tractors but the Farmall B is the only offset tricycle that I've seen. I've also noticed on the Oliver and Ford offset designs that the offset is minimal. With the Farmall/IH Culti-vision tractors the engine/body rail is displace to one side quite a bit. The Ford and Oliver pics still show a centered engine with the seat moved over along with the clutch pedal. Might have something to do with Farmall's patent on Culti-vision.
"If America could be, once again, a nation of self-reliant farmers, craftsmen, hunters, ranchers, and artists, then the rich would have little power to dominate others. Neither to serve nor to rule:That was the American dream." -- Edward Abbey

Song
5+ Years
5+ Years

Re: Offset tricycle?

Postby Song » Sat Mar 06, 2010 10:32 pm

John Deere had an offset 900HC

Image


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 1 guest