1960 140 gov problem

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
billy clay
5+ Years
5+ Years
501 Club
501 Club
Posts: 1086
Joined: Thu Jun 12, 2008 8:24 pm
Zip Code: 20657
Tractors Owned: 1962 farmall 460 d
1978 cub fasthitch
1957 cub fasthitch
1970 cub fasthitch
1954 john deere 40
1967 cub fasthitch
1954 john deere 60
1973 cub
Location: souther md

1960 140 gov problem

Postby billy clay » Mon Apr 05, 2010 7:18 pm

when you move the throtle lever it does not change the engine speed you have to manually move the carb linkage. when you look in oil cap on gov. you can see the weight move hooked to the shaft tha truns across to the carb but the weight hooked to the throttle lever does not move at all any ideas or diagrams would be helpful
1973 cub
1957 cub fasthitch
1967 cub fasthitch
1970 cub fasthitch
woods rm42
194 plow
fasthich disc
twindraulic loader
woods 42 rear fasthitch mower
CULTIVATORS

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: 1960 140 gov problem

Postby Jim Becker » Mon Apr 05, 2010 10:43 pm

Sounds like a broken governor spring. It is inside the governor housing. Look in the parts catalog for an exploded diagram.


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 2 guests