Redneck Tapered Implement Bolt

How to fix them and how to use them.

Moderators: Stanton, Team Cub

User avatar
BIGHOSS
10+ Years
10+ Years
Posts: 1629
Joined: Tue Jul 18, 2006 9:55 pm
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower

1974 Cub S/N 244814
w/59 Woods Mower

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog

and a Palomino Mare named GIGI
Circle of Safety: Y
Location: TN, Lebanon

Redneck Tapered Implement Bolt

Postby BIGHOSS » Wed Oct 20, 2010 9:17 pm

This method has been discussed on here before. Since I never have any new ideas, this is how I did it.

First take a 5/8" x 3" bolt and cut off the head.
001.JPG

Jam two nuts on threaded end.
002.JPG

Chuck bolt in drill press.
003.JPG

Grind taper with angle grinder while running drill press.
004.JPG

Finished Bevel on nut.
005.JPG

Install beveled nut on a 5/8 " bolt.
006.JPG

Use Locktite to keep nut tight against the head of bolt.
We make a living by what we get, but we make a life by what we give......Winston Churchill

  • Similar Topics
    Replies
    Views
    Last post

Return to “Implements”

Who is online

Users browsing this forum: No registered users and 1 guest