Generator/Starter studs

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
5+ Years
5+ Years
Posts: 81
Joined: Thu Apr 15, 2010 6:27 am
Zip Code: 16668
Location: Central PA

Generator/Starter studs

Postby cef2lion » Thu Nov 04, 2010 2:38 pm

The threads on my 125 generator/start posts are very worn to the point of being stripped. Can't get a good tight connection. Is it possible to get new posts and install or best left to a shop? I looked at one parts sight and it said not available.


Team Cub Mentor
Team Cub Mentor
Posts: 16798
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Generator/Starter studs

Postby Eugene » Fri Nov 05, 2010 1:23 pm

Remove the rear cover and check. It appears that the "studs" are bolts. One bolt appears to have a flattened end, tapped for a screw. The other is simply a bolt.

I'm looking at a parts manual for a Wisconsin engine, Delco-Remy generator. Shows studs with two different parts numbers. One for the armature terminal and one for the field termainal.

Your local starter, generator repair shop should have the studs in stock. Either have the parts in hand or the numbers from the starter/generator case.

Just buying and replacing the studs should not be a problem. But, perhaps it would be a good idea to have the starter/generator checked over and repaired. Or if you have the tools, tear down and rebuild it yourself.
I have an excuse. CRS.

  • Similar Topics
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 0 guests