Super H belt work question

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Super H belt work question

Postby artc » Tue Nov 16, 2010 11:53 am

We've been belting our Super H to a 27 inch Lane planer for short periods but since we've had a lot to plane recently we've left it attached.

What i don't remember (and i've had an H transmission completely apart!) is if the H transmission turns gears in the transmission enough to lubricate itself when belted, or is it like the cub and early A?
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
User avatar
artc
Cub Pro
Cub Pro
 
Posts: 1750
Joined: Sun Mar 30, 2003 10:25 am
Location: CT, Middletown
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.

Re: Super H belt work question

Postby Rudi » Tue Nov 16, 2010 12:33 pm

Art:

I have very little experience with the H/Super H aside from one residing in my yard for a couple years and playing with it a bit. :roll: So, all I can do is offer up the TC-27D ..... Page 109 and Page 215
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Super H belt work question

Postby Jim Becker » Tue Nov 16, 2010 8:20 pm

The lower shaft on the tranmission turns any time the clutch is engaged. You can probably run it on a belt for 100 years and not have a problem unless the oil all leaked out.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11930
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: Super H belt work question

Postby artc » Wed Nov 17, 2010 5:48 pm

thanks, Jim..that's what i thought
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
User avatar
artc
Cub Pro
Cub Pro
 
Posts: 1750
Joined: Sun Mar 30, 2003 10:25 am
Location: CT, Middletown
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.

Re: Super H belt work question

Postby Rabbit Holler Flash » Sat Nov 20, 2010 7:50 pm

I was always told by Dad when doing belt work to be sure and hook a chain around drawbar n let it touch the ground to discharge static built up by the belt running. We used a H farmall and a VAC case to power a post sharpener on a wood frame that wasnt "grounded by metal to earth.
Rabbit Holler Flash
5+ Years
5+ Years
 
Posts: 267
Joined: Sun Nov 30, 2008 3:12 pm
Location: Mo. Potosi
Zip Code: 63664
Circle of Safety Award
Circle of Safety: Y


Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 2 guests