SA hydraulics bleeding down

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Gerry Powell
5+ Years
5+ Years
Cub Star!!
Cub Star!!
Posts: 311
Joined: Wed Jan 21, 2009 2:17 pm
Zip Code: 78736
Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350
Location: Austin, TX

SA hydraulics bleeding down

Postby Gerry Powell » Wed Dec 08, 2010 1:46 pm

The hydraulics bleed down fairly quickly when the tractor is turned off. It works good otherwise when the engine is running. I think this started after I tried to lift something too heavy and lifted the front tires off the ground. Is it OK to keep using it like this or does it need a rebuild?
GP

User avatar
spaceghost
10+ Years
10+ Years
501 Club
501 Club
Posts: 748
Joined: Wed Jun 23, 2004 8:19 am
Zip Code: 02346
Tractors Owned: 1959 Cub lo-boy
1950 super A
Location: Middleboro MA usa

Re: SA hydraulics bleeding down

Postby spaceghost » Thu Dec 09, 2010 1:50 pm

The reason why the hydraulics drop when a SA or Cub is shut off is because hydraulic fluid is leaking from or around the piston in the TC unit. The hydraulic fluid with leak into the head of the TC or past the O rings on the piston (two O rings in the wall of the piston shaft. Try replacing the head gasket first (no gasket sealer and use a torque wrench to torque down the head).
Be sure to keep the insides of the TC nice and clean.
Bacon makes every thing better.
1959 LO-Boy 1950 Super A

User avatar
Super A
10+ Years
10+ Years
501 Club
501 Club
Posts: 4104
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety: Y
Location: NC, Jacksonville area

Re: SA hydraulics bleeding down

Postby Super A » Fri Dec 10, 2010 9:18 am

Very common issue, and as long as it is not leaking externally or leaking from the pump into the crankcase I wouldn't worry about it too much.

In addition to the sources Spaceghost mentioned, I think the leak could come from any of the o-rings inside the TC block. If I was going to take it off the tractor I would just go ahead replace all the o-rings and gaskets. CaseIH should have a kit for it--be sure to get the part # off the TC block because there were some changes to the TC during Super A production.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.

User avatar
Gerry Powell
5+ Years
5+ Years
Cub Star!!
Cub Star!!
Posts: 311
Joined: Wed Jan 21, 2009 2:17 pm
Zip Code: 78736
Tractors Owned: two 1948 Cubs
1951 Super A
Kubota L2350
Location: Austin, TX

Re: SA hydraulics bleeding down

Postby Gerry Powell » Fri Dec 10, 2010 10:43 am

The oil leaks from the block somewhere, I have to top it off often. Sounds like I need to rebuild it. CaseIH lists a kit for around a $100.
GP

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: SA hydraulics bleeding down

Postby John *.?-!.* cub owner » Sat Dec 11, 2010 10:04 am

If you keep having to add oil to the TC unit, but no sign of an external leak, it is leaking past the seal in the pump and going into the engine crankcase. That is not the problem with the lift dropping though. The C oil is not a good engine lubricant, and that needs to be fixed and the engine oil changed. The seal for the pump is NOT included in the TC rebuild kit, and is also dependent on which pump you have. You can get the seal from Case/Ih, or take your old one to your local Carquest, NAPA, etc.
If you are not part of the solution,
you are part of the problem!!!


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: CDD and 0 guests