cub restoration on hold

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
cubbrian
5+ Years
5+ Years
501 Club
501 Club
Posts: 802
Joined: Sun Apr 08, 2007 7:47 pm
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor
Location: IN, New Harmony

cub restoration on hold

Postby cubbrian » Thu Jan 20, 2011 6:59 pm

Well, I've made the decision to hold off on the restoration on my 1955 cub. I am beginning to gather parts to restore the tractor I learned to drive on, my grandfather's 1961 Farmall 560. It needs a lot of work (complete engine rebuild, new T/A and new tires to name a few. This project will take at least 2 years for me to complete. I will try to give updated photos as I progress, but they will be few as I am now just starting to gather parts. Here is what I have to start with. Image

User avatar
Bigdog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: cub restoration on hold

Postby Bigdog » Thu Jan 20, 2011 7:03 pm

Brian - I spent many hours on a 560 Diesel. I loved looking down that long hood from the operator's seat!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

VinceD
10+ Years
10+ Years
501 Club
501 Club
Posts: 4580
Joined: Mon Apr 17, 2006 9:17 pm
Zip Code: 65626
Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155
Circle of Safety: Y
Location: MO, Bakersfield, (South - Central)

Re: cub restoration on hold

Postby VinceD » Thu Jan 20, 2011 7:12 pm

Brian, sounds like you have quite a project ahead of you. Good luck and can't wait to see the pictures as you make progress. :D :D
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
Image

User avatar
beaconlight
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Re: cub restoration on hold

Postby beaconlight » Thu Jan 20, 2011 7:38 pm

Lots of luck with it.
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
John(videodoc)
10+ Years
10+ Years
501 Club
501 Club
Posts: 6532
Joined: Mon Jul 25, 2005 10:16 pm
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL
Circle of Safety: Y
Location: IL, Paris just off of Interstate 70

Re: cub restoration on hold

Postby John(videodoc) » Thu Jan 20, 2011 8:55 pm

Good luck Brian. I too, got many hours behind the wheel of a 560. Raking hay, plowing and such.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: cub restoration on hold

Postby John *.?-!.* cub owner » Thu Jan 20, 2011 9:51 pm

Have fun Brian. Be sure to check the rear axle inner bearing. They were a problem, would go bad and the bull gear would rub a hole in the bottom of the case.
If you are not part of the solution,
you are part of the problem!!!

DarinO
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 104
Joined: Fri Jan 06, 2006 3:50 pm
Location: IN, Seymour

Re: cub restoration on hold

Postby DarinO » Fri Jan 21, 2011 9:44 pm

Brian, that's a nice looking original set up, of course the memories are priceless. I would like to have just 1 of the tractors back that Grandpa had when I was a kid. I saw a 412 plow like that on an auction last fall. It had that same rear transport wheel. I'd never seen one like that before.
"that'll take the mule out of the melon patch!" Bub Baker

cubbrian
5+ Years
5+ Years
501 Club
501 Club
Posts: 802
Joined: Sun Apr 08, 2007 7:47 pm
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor
Location: IN, New Harmony

Re: cub restoration on hold

Postby cubbrian » Mon Feb 14, 2011 10:24 pm

Well, here is the first update. These may not be the most important items, but at least it gives me something to look at. Image

Image These are original emblems that have been restored. They are not the same ones pictured in the "before picture", but what a difference! I didn't notice until I was resizing the pictures that I got my fingerprints on the refurbed emblems.


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests