Drawbar thickness??

Farmall M, Super M, 400, 450 & 560 Tractors, 1939-1963

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Jeff D. N.E. Wis.
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 250
Joined: Mon Feb 03, 2003 2:00 pm
Zip Code: 54235
Circle of Safety: Y
Location: WI Sturgeon Bay

Drawbar thickness??

Postby Jeff D. N.E. Wis. » Sun Mar 06, 2011 8:21 pm

What is the correct thickness for the swinging drawbar on a M/MD? Is it 3/4' or 1". The one that is on our 1951 Farmall MD is 3/4". It is all welded & buggered up so I am looking for a better one. The swivel/mounting point for it looks like it would accept a 1" bar. Thanks.
49 Farmall Cub, 68 I-H Cub LoBoy
53 Farmall Super-A, 44 Farmall B
52 Farmall Super-C, 41 Farmall H
40 Farmall M, 46 Farmall M
51 Farmall MD, 50 Case DC-3
54 Case 500 Diesel
71 Allis-Chalmers 160 Diesel

DanR
5+ Years
5+ Years
501 Club
501 Club
Posts: 1631
Joined: Fri Dec 22, 2006 6:28 am
Zip Code: 37743
Circle of Safety: Y
Location: Tennessee East

Re: Drawbar thickness??

Postby DanR » Mon Mar 07, 2011 7:24 am

1" is correct. The 3/4" is probably from an H.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.


Return to “Farmall M, Super M, 400, 450, & 560”

Who is online

Users browsing this forum: No registered users and 0 guests