All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
8 posts • Page 1 of 1
last year a friend brought dad a IH Famous one cylinder vertical engine with the piston stuck in the cylinder. the guy could not figure out how to get it apart with the stuck piston.
turns out the engine allows you to remove the connecting rod bolts through an access plate in the side of the block. that allowed us to remove the cylinder with the stuck piston.
i put the assembly in the electrolysis tank for more than a week and tried to tap the piston out. nope, nothing doing. soaked it in kroil for 2 or 3 weeks - tried again.....
Gave it back to Dad who had a couple of ideas.....didn't work. Now keep in mind that this is not a Farmall Cub where we could replace the piston or the cylinder easy...there are no readily available replacement parts for this engine, so we do not want to break anything.
it has been soaking in a penetrating oil for almost a year, and yesterday the piston came out with the application of an estimated 5 tons of pressure from a press!! The penetrating oil had done the job, only the rings remained stuck.
a simple hone of the cylinder and new rings is all it needs. Success!!!
'If they're tappin', they're not burnin'
As they say Art, Patience is a Virtue
Congrats on getting the engine running again. Sounds like you and your Dad enjoyed the project.
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
One of the two remaining volunteer fire companies on Staten Island had an old engine with a similar problem that took about the same amount of time to get it unstuck and running again.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
I hope it does not take me a year to get those two spark plug out I have been working on the last couple of days.
"Always start out the way you want to end up"
Way to go Art. Can't wait to see pictures fo the finished engine. As the line from the Lord of the Rings says, "Don't be hasty". Patience really paid off this time.
High atop Hummingbird Hill
In the Missouri Ozarks
WOW!!!! Congrats!!!! My bike been in the basement 2 years[engine NOT stuck] and finally got it going.One year in oil,congrats!!!! Kevin is it running yet??
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
8 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests