Ring Seal on the SA PTO

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Dale Finch
5+ Years
5+ Years
501 Club
501 Club
Posts: 2193
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Ring Seal on the SA PTO

Postby Dale Finch » Fri Apr 22, 2011 6:05 pm

A quick question: while I was replacing the bearing on the SA PTO (previous post), I decided to replace what appeared to be a ragged ring seal (the middle vertical part):

Image

Image

It seemed to be a leather ring that fit on the outside edge of a steel plate that goes into the Belt Pulley Housing. So I ordered one from the IH dealer, and the new one is a large rubber o-ring, rather than a flat leather ring. Anyone have any experience with this? I actually haven't tried it yet, since I got it today, but thought I would ask before I go to the shop, just in case there were any potential problems or tricks to installing it.

Thanks, Dale F

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12160
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Ring Seal on the SA PTO

Postby Jim Becker » Fri Apr 22, 2011 6:42 pm

Just be sure to coat it with oil before you install it.

User avatar
Dale Finch
5+ Years
5+ Years
501 Club
501 Club
Posts: 2193
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Ring Seal on the SA PTO

Postby Dale Finch » Fri Apr 22, 2011 6:46 pm

OK, thanks, Jim!

Dale F


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: havoc1482 and 0 guests