New member saying hello

Sun May 15, 2011 8:02 am

Hi all. My father in law and I just bought a Farmall 100 with a Woods L59 belly mower. Just something to tinker with, but looking forward to learning about it and playing a little. Just ordered a service manual, as it shut off and won't crank. Starter tested good, thinking maybe the switch on top of the starter? Thus the service manual. Shes in decent shape, needs some TLC but ran good and cut nice. We'll get 'er figured out. See y'all on the boards here. -Tim

Re: New member saying hello

Sun May 15, 2011 6:04 pm

Tim, welcome to the forum. You will find great people with more info than you can possibly imagine and all willing to share. As you run into issues, just post your questions. :D :D

You might consider going to the "Introduce Yourself" part of the forum and posting a few lines about yourself.

Re: New member saying hello

Sun May 15, 2011 9:44 pm

Tim:

G'day and congrats on acquiring your 100 :applause:

While technically most of the server applies to Cubs etc., there are some manuals that apply to other Letter Series and Number Series tractors. Some of the electrical ones in the Blue Ribbon Service pages may apply as well. I hope they may be of some help.

Image to the Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. You may also wish to check out the CubFests and Gatherings Calendar 2011 to find a gathering of fellow members where Cubs, Friends and a good time is shared by all. Enjoy!.

Re: New member saying hello

Tue May 17, 2011 8:14 am

Thanks for the welcome! While my father-in-law actually purchased the 100 he is really less than motivated to do anything these days, at 65. I call it laziness ( he lives with us in an in-law quarters downstairs ) but thats a story for another day :censored: . So I will be doing the research and PM and such since he has a hard time even climbing up on it. It sits in his garage, which is next to mine, and the starter has been sitting on the workbench for at least 4-5 days now. Its like a cat and mouse game- I wait to see if he gets motivated enough to do something, and when I finally can't take it anymore I just do it myself :roll: I asked him yesterday if the hand crank came with it? He did this :big say what: lol. I wish he would get motivated to at least learn how to surf a forum so he can learn like I'm trying to do. I run heavy equiptment for a living and I'm mechanically inclined to a point, but eager to learn ( I'm only 43). I enjoy a challenge and this looks like it will have some fun involved. I have some co-workers that come from a farming backround and a few own tractors, but most are Green fans so I can pick their brains also. With the rain here all week I probably won't be working and my patience will wear quickly so I'm sure by this time Thurs I will have the starter back in it if he gets the switch and I'll get to testing stuff from there :big smile:

Re: New member saying hello

Tue May 17, 2011 8:49 am

Check all the battery cable connections. Both ends of both cables! Don't neglect the ground connections. Even slight corrosion can stop a starter under load. Every connection needs to be tight and shiny! Remove the cables and wire brush the connectors and also the surfaces they contact.

Re: New member saying hello

Tue May 17, 2011 11:13 am

Thanks Bigdog, I will look at that next. I do, however, like your "hammer" approach :)

Re: New member saying hello

Tue May 17, 2011 11:21 pm

Hammer or hand crank....I have started my H with a hand crank,,,though prefer a starter.Yep clean the connections!!!

Re: New member saying hello

Wed May 18, 2011 3:32 pm

Well, good news! I "urged" my father-in-law to reinstall the starter since he was the one who removed it and to be sure all the surfaces were free of corrosion. Wah-lah! She fired right up! Thanks Bigdog for your advice. Now he's mad that he spent $40 to have the starter bench-tested. On to the next project, find out where the gas tank is leaking. Then the fouled-up plug in the top of the PTO case, the PTO seal...the list goes on, all minor stuff hopefully!

Re: New member saying hello

Wed May 18, 2011 3:39 pm

Chumley (may I call you Chumley?) We always appreciate feedback when something works. It helps everyone learn a bit. When you get to those other issues let us know what we can do to help.

Re: New member saying hello

Fri May 20, 2011 3:56 am

Yes sir you can call me Chumley, its a nickname from work. Or you can call me Tim, anything but late for supper :lol: Next is a new V-belt for the deck, it is shot and keeps jumping off the pulleys, then figure out why the starter grinds sometimes. Maybe a weak engagement spring? Just having fun with it!

Re: New member saying hello

Wed May 25, 2011 7:41 am

Welcome to the forum.

Re: New member saying hello

Sun Jun 19, 2011 8:05 am

Thank you sir