Cub hydraulic pump Parts

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 12:50 pm

1953 Cub recent purchase. When I got it the touch control pump and lines were removed and both areas blocked off with plates. I have the pump and the lines and am planning on a reinstallation to figure out if it works or leaks or that there was a reason why it was removed. I am starting with the pump that I split in two to make sure that there wasn't any dirt or debris inside. In between the 2 gears on one side of them was a black blob of plastic. I removed it as it looked more like RTV that got into the system and lodged there than a machined part. I see a part called a bearing seal pin. #10 on most parts illustrations from IH. Is this what I removed? Was it really plastic? Do I need it? Can I gt it?
Sharkmaster
 
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 1:12 pm

viewtopic.php?f=11&t=44196

Welcome to the forum!
this "How to" covers the parts very well in the rebuild

Sounds like an O ring remains/scrap in there to me
User avatar
ToddW
5+ Years
5+ Years
 
Posts: 2285
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 1:32 pm

I will look Thanks Great forum
Sharkmaster
 
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 1:35 pm

The link I posted should take you right to the topic on the pump rebuild.
Sounds like you are off to a great start in fixing the issue!
User avatar
ToddW
5+ Years
5+ Years
 
Posts: 2285
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 2:20 pm

It looks like I can rebuild from that great post. I do however see a part as a bearing seal pin. Because it is installed it is hard to make out what it looks like but is a part and mine was damaged. I assume that that seal and gasket kit is available and should include that pin
Sharkmaster
 
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 2:25 pm

TM tractor is a site sponsor and have great service and reasonable prices

http://www.tmtractor.com/new/hy/288fp.htm

here is the kit, no key/pin though

maybe Case IH sells the pin, not sure
User avatar
ToddW
5+ Years
5+ Years
 
Posts: 2285
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Arthur Luke » Fri Jun 10, 2011 4:53 pm

If you look at TM's picture of the kit, that little black dot towards the bottom is the pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Have a good day, Art Image
User avatar
Arthur Luke
5+ Years
5+ Years
 
Posts: 727
Joined: Fri May 09, 2008 2:47 pm
Location: OK, Copan
Zip Code: 74022
Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Don McCombs » Fri Jun 10, 2011 5:41 pm

When new, the seal looks like a miniature hockey puck. Yes, you need it. No, you can't buy it seperately. You'll need to buy the whole pump rebuild kit. Might as well do the whole job while you have it split. :D
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10586
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby The Ridge » Wed Dec 05, 2012 3:30 pm

Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan
The Ridge
 
Posts: 1
Joined: Tue Dec 04, 2012 8:00 pm
Zip Code: 24067

Re: Cub hydraulic pump Parts

Postby ricky racer » Wed Dec 05, 2012 4:53 pm

Sharkmaster wrote:I will look Thanks Great forum


Best Cub website on the planet!!!!!! :big afro:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
User avatar
ricky racer
5+ Years
5+ Years
 
Posts: 2828
Joined: Wed Sep 12, 2007 8:40 pm
Location: Niles / Buchanan, Michigan
Zip Code: 49120
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Don McCombs » Wed Dec 05, 2012 5:39 pm

Dan,

Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10586
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Eugene » Wed Dec 05, 2012 6:22 pm

The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one? Dan
Is it the drive gear off the front of the hydraulic pump? If you need one of the gears inside the pump, then you need to purchase a complete hydraulic pump. In any event, you can advertise in the for sale/wanted section of this site.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12615
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Alan Riley » Thu Dec 06, 2012 11:39 am

About 10 years ago I priced just the drive gear at my local Case-IH dealership. I seem to recall them wanting around $135 for one back then. :cry:
Old Age: The phase of life when nothing works and everything hurts...
Alan Riley
10+ Years
10+ Years
 
Posts: 424
Joined: Wed Feb 05, 2003 11:49 pm
Location: LA, Deville
Zip Code: 71328

Re: Cub hydraulic pump Parts

Postby Hengy » Thu Dec 06, 2012 1:22 pm

Did your gear get all chewed up or is it missing (as in came off the shaft)...
Mike (Happy as a Lark in Allison Park, PA)
Image Image

Check out my Restoration Thread (1955 Cub, Lewis)
User avatar
Hengy
5+ Years
5+ Years
 
Posts: 7109
Joined: Sat Feb 18, 2006 8:12 pm
Location: PA, Allison Park (Am Hengelsberg)
Zip Code: 15101
eBay ID: lacrosseorgans
Skype Name: Mike.Hengelsberg
Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow
Circle of Safety Award
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby Denny Clayton » Thu Dec 06, 2012 4:50 pm

The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan

Have you looked in the oil pan?
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
10+ Years
10+ Years
 
Posts: 3691
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y

Next

Return to Farmall Cub

Who is online

Users browsing this forum: weslypype and 1 guest