belt pulley housing

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
leroy68
5+ Years
5+ Years
Posts: 28
Joined: Thu Jun 02, 2011 8:31 pm
Zip Code: 30520

belt pulley housing

Postby leroy68 » Thu Jun 23, 2011 10:45 pm

Pulled mine off bearing looks good but leaking a little around outside of shaft should oil seal fix this problem? What else do i need to do since i have it off?

leroy68
5+ Years
5+ Years
Posts: 28
Joined: Thu Jun 02, 2011 8:31 pm
Zip Code: 30520

Re: belt pulley housing

Postby leroy68 » Thu Jun 23, 2011 10:49 pm

Is there suppose to be a gasket behind the plate on the right side where the oil seal is at
You do not have the required permissions to view the files attached to this post.

User avatar
Dale Finch
5+ Years
5+ Years
501 Club
501 Club
Posts: 2192
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: belt pulley housing

Postby Dale Finch » Thu Jun 23, 2011 11:26 pm

If you remove the retainer, #48, you'll need to replace the gasket #47. Don't think it was necessary, though, when just replacing the seal #49.

http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20268.jpg

Dale F


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 0 guests