Used the 1000 Loader Today!!!

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
BigMatt
5+ Years
5+ Years
Posts: 527
Joined: Sat Jul 17, 2010 10:41 am
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety: Y
Location: New Castle, IN

Used the 1000 Loader Today!!!

Postby BigMatt » Sun Jan 22, 2012 8:36 pm

I bought some stuff at the auction yesterday and unloaded the trailer today! The loader worked. It was a little light on capacity, but I was able to rotate the bucket to get the bush hog up.

I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.

What do you guys think?

Image

User avatar
Steve Butram
Cub Pro
Cub Pro
Posts: 1986
Joined: Mon Feb 17, 2003 7:53 am
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
1948
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Circle of Safety: Y
Location: IN West Lafayette

Re: Used the 1000 Loader Today!!!

Postby Steve Butram » Sun Jan 22, 2012 9:54 pm

there is a presure relief on the loader valve you may want to adjust to get some add lifting power.
Be prepared to be unprepared Seth Goden

BigMatt
5+ Years
5+ Years
Posts: 527
Joined: Sat Jul 17, 2010 10:41 am
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety: Y
Location: New Castle, IN

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Mon Jan 23, 2012 6:42 am

OK, I will look through the operator's manual today.

User avatar
Steve Butram
Cub Pro
Cub Pro
Posts: 1986
Joined: Mon Feb 17, 2003 7:53 am
Zip Code: 47906
eBay ID: steveb05
Tractors Owned: 1947 in well used condition
1948 restored
1948
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Circle of Safety: Y
Location: IN West Lafayette

Re: Used the 1000 Loader Today!!!

Postby Steve Butram » Mon Jan 23, 2012 7:35 am

It will be under the Acorn Nut on the left side of the valve.
Be prepared to be unprepared Seth Goden

User avatar
cjpenny89
10+ Years
10+ Years
Posts: 1073
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Wed Jan 25, 2012 8:21 am

do you have a fast hitch brush hog on that tractor? 4' or 5'? I want to get one for mine or make one!
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100

BigMatt
5+ Years
5+ Years
Posts: 527
Joined: Sat Jul 17, 2010 10:41 am
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety: Y
Location: New Castle, IN

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Wed Jan 25, 2012 8:52 am

I have 2 fast hitch bush hogs. I am looking to sell one of them.

PM sent...

User avatar
cjpenny89
10+ Years
10+ Years
Posts: 1073
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Wed Jan 25, 2012 3:10 pm

pm sent back I think I will take it
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100

BigMatt
5+ Years
5+ Years
Posts: 527
Joined: Sat Jul 17, 2010 10:41 am
Zip Code: 46163
Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184
Circle of Safety: Y
Location: New Castle, IN

Re: Used the 1000 Loader Today!!!

Postby BigMatt » Wed Jan 25, 2012 6:28 pm

OK, I went out and adjusted the pressure relief today after work. It is running really well now. I adjusted it so that it would just pick up the bush hog without bypassing at all. I don't have a 1500 PSI gauge. I also ran both rams against a stop and the hoses held, so the relief is still doing it's job.

Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.

User avatar
cjpenny89
10+ Years
10+ Years
Posts: 1073
Joined: Mon Feb 03, 2003 1:15 pm
Location: St. Charles, MI 48655

Re: Used the 1000 Loader Today!!!

Postby cjpenny89 » Thu Jan 26, 2012 7:31 am

I may have a gauge for you!
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 1 guest