All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
12 posts • Page 1 of 1
I have an opportunity to buy this old implement .
It is being called a log carrier but how does it work? I could use a log carrier as I have tons of logs in the yard still. I could also make into a large trailer for the cub to hold hay for rides and so on.
Anyone have any input ? It's a good price btw. Hard to pass up.
it can be whatever you want it to be, but it's definately not a log arch, yet, lol. The flat iron on the front looks like where a wooden tongue would go, but the round rod and other parts on the axle are a puzzle to me.
Last edited by danovercash on Thu Feb 16, 2012 10:41 pm, edited 2 times in total.
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
Just my opinion. If you want to build a Cub sized trailer, get a boat trailer or something with rubber tires and good bearings. That way you can use it with the Cub and then behind a pickup.
I have an excuse. CRS.
I like the look of an older trailer for the tractor. I have 3 road trailers as it is now. If I build a trailer out of this it would be for fun not really for work.
Here is the one that gets used around the land
The true logging wheel or Michigan wheel because of their first use here or several other names, are at least 10 feet high. By lifting the tongue the attach point above the axle is lowered slightly and the log is attached. Whe the tongue is lowered the end of the log is lifted off the ground and the tongue attached to the team for skidding out. Vern
Do a search for "Logging ATV" There are many logging arches and carts used with quads that size match well with a Cub.
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
I have to agree with Jim its a front axle for a horse drawn grader. The axle is upside down right now. The bar across it should be on the bottom and is a brace to keep the axle from bending. The center piece that the frame would bolt to has set screws so you can set it off center to get the grader off to the side and down in a ditch.
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
Now your getting in my home town there, I've been in this lil town since born and will probably be here till I dies lol. If you need and more pictures of this Dualing then let me know. I only live a few miles from this thing and drive past it everyday
48 cub with full cultivators
48 cub all original 6 volt, hand crank, muffler, front + rear wheel weights, and fast hitch and a 1000 loader
Left hand plow, right hand plow, disc, grader/snow blade, lots of cultivator stuff, woods 42, and a few others
I use a landscape trailer too but its 7' wide which is too wide for the wooded paths behind my home.
I've been thinking about keeping an eye out for a small boat trailer which are about 5' wide. Being long it'd probably work well for logs.
I was thinking of using it for hauling canoes and kayaks back from the river too.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
Hey Chris , small world. The people sent me a good amount of photos, I just want to find out what it really is lol. I was wanting to go pick it up this weekend but I have a lot to do and our email communication is slow between each other haha.
I really just love old stuff.
12 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests