Plow

Sat Jun 16, 2012 8:50 am

I have a plow that I was told was for a cub, however, when I tried to mount it I found that the bracket holes were too wide. This looks just like a 193 plow, but the holes span across 4 holes on the drawbar (don't line up exactly) instead of 3 holes like in the manual. Could this be for an A or C? The numbers after the IH symbol are: Beam-512504R1,Bottom-515708R1,also on the bottom-SC1.

Re: Plow

Sat Jun 16, 2012 9:58 am

The beam on my 193 has IH 512320R1. It fits my Cub perfectly. I don't know what your numbers mean, but someone will.


Tom

Re: Plow

Sat Jun 16, 2012 10:37 am

I checked the CaseIH On-Line Parts Lookup. The beam comes out as for an A-193 IH 1 Way 1 Furrow Moldboard Plow. The bottom and share don't come up... probably because they fit others as well.

Re: Plow

Sat Jun 16, 2012 7:19 pm

Thanks Rudi, and thanks for the link also!

Re: Plow

Sat Jun 16, 2012 10:37 pm

You is welcome :D I used to have a manual for that on the server, but somehow it got misplaced. Still looking to see if I have the original in my collection somewhere.