what have yawl found to be the best abrasive that does not get clogged up in a blast cabinet?
I am having problems with mine getting clogged and I have a water trap on it too . using black diamond right now
sand blaster getting stopped up
Moderator: Team Cub
Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
4 posts
• Page 1 of 1
sand blaster getting stopped up
by Boss Hog » Fri Jul 13, 2012 7:02 pm
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
Boss Hog - Cub Pro
- Posts: 8969
- Joined: Mon Oct 24, 2005 8:35 pm
- Location: VA. Randolph
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
Re: sand blaster getting stopped up
by ScottyD'sdad » Fri Jul 13, 2012 7:16 pm
Cecil just complained to me, about his blaster. Seems the humidity is too much for the water traps to handle. Cecil uses the black grit, from Tractor Supply. Don't know if some other grit would be better. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
- ScottyD'sdad
- Cub Pro
- Posts: 4565
- Joined: Thu Aug 31, 2006 7:00 pm
- Location: Ma. Rehoboth
- Zip Code: 02769
- Circle of Safety: Y
Re: sand blaster getting stopped up
by Boss Hog » Fri Jul 13, 2012 9:18 pm
Thats what I use too Ed
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
Boss Hog - Cub Pro
- Posts: 8969
- Joined: Mon Oct 24, 2005 8:35 pm
- Location: VA. Randolph
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
Re: sand blaster getting stopped up
by Bill V in Md » Fri Jul 13, 2012 10:21 pm
I use black beauty, and have tried various water traps that still allowed enough moisture through to routinely plug the nozzle. I switched to a dessicant dryer that I got from McMaster-Carr (see below link)
http://www.mcmaster.com/#desiccant-air-dryers/=ie9lfw
I have the one with the zinc body and polycarbonate bowl, and it works great. The nice thing about these dryers is the desiccant can be removed and dried in an oven and used again. I've had mine for about a year and have only removed the desiccant and dried it once.
http://www.mcmaster.com/#desiccant-air-dryers/=ie9lfw
I have the one with the zinc body and polycarbonate bowl, and it works great. The nice thing about these dryers is the desiccant can be removed and dried in an oven and used again. I've had mine for about a year and have only removed the desiccant and dried it once.
Bill VanHooser
1948 Cub w/ snowplow
1948 Cub w/ snowplow
-
Bill V in Md - Cub Star!!
- Posts: 491
- Joined: Sun Feb 02, 2003 6:51 pm
- Location: MD, Catonsville
- Zip Code: 21228
- Circle of Safety: Y
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
|
|