hand crank

Sat Oct 13, 2012 9:04 am

hi :help: :lost: dose any one have a pic where the hold down clips for the hand crank go's

Re: hand crank

Sat Oct 13, 2012 9:11 am

See picture:
You do not have the required permissions to view the files attached to this post.

Re: hand crank

Sat Oct 13, 2012 9:13 am

There are two 10-32 threaded holes in your floor pan, they may have broken screws in them already so you may need to drill them out and retap, the screw length will be 1/4"

Re: hand crank

Sat Oct 13, 2012 9:15 am

thanks GUY what a big help everyone on the forum is

Re: hand crank

Sat Oct 13, 2012 11:41 am

non-prototypical...velcro
VELCRO.jpg
You do not have the required permissions to view the files attached to this post.

Re: hand crank

Mon Oct 15, 2012 5:54 pm

BTW Joe, TM sells the pieces:
http://www.tmtractor.com/new/se/864fp.htm

Re: hand crank

Tue Oct 16, 2012 9:36 am

I'd like to order some of those clips from TM for my Cub but, first, where are these battery cables supposed to go? Under the floor board?

Image

Re: hand crank

Tue Oct 16, 2012 9:40 am

Steve Woods wrote:I'd like to order some of those clips from TM for my Cub but, first, where are these battery cables supposed to go? Under the floor board?

Yes.

Re: hand crank

Tue Oct 16, 2012 9:53 am

Image
Cable routed from battery to under platform
Photo by Barnyard

Image
Photo by Bigdog

Image
Photo by Bigdog

Image
Photo by Bigdog

Re: hand crank

Tue Oct 16, 2012 9:58 am

Thanks guys.

Re: hand crank

Tue Oct 16, 2012 10:31 am

This portion of the battery cable and rear light harness, by design, should run along the edge of the instrument panel and pass behind the clutch stop peg. A clip should attach to the open hole in the panel. The clip holds the cables in place and provides some abrasion protection. Here is a picture of the clip. Routing the cable forward of the peg does a pretty good job of keeping it out of harms way without the clip.

Image
Photo by Bigdog

Image
Photo from TM Tractor Parts

Re: hand crank

Tue Oct 16, 2012 11:15 am

Here is what Jim is referring to.

Image

Here it is with the clutch pedal held down for clarity.
Image

Re: hand crank

Tue Oct 16, 2012 11:35 am

I ordered a couple of the hand crank clips from TM while ago but I can't find those battery cable loopety clips in their catalog. They weren't shown with the battery cable stuff anyway?

Re: hand crank

Tue Oct 16, 2012 12:00 pm

Steve Woods wrote:I ordered a couple of the hand crank clips from TM while ago but I can't find those battery cable loopety clips in their catalog. They weren't shown with the battery cable stuff anyway?

TM hasn't carried them for a while. Stiener has them for about 10 bucks. If you aren't going for originality you can go to a hardware store or possibly a parts house and get one of these.

Image

Re: hand crank

Tue Oct 16, 2012 2:23 pm

Crap! I have the wiring on top too because that's where it was when I started. Never occurred to me that those clips were for the crank!