Farmall Super A, AV, 1939 - 1954
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Hoping to get the helper spring mounted on my Super A, been using the Fast Hitch for several months and it works great but the disk harrow is pretty heavy for it. Anyway, I know where the bracket bolts to the side of the torque tube, but where does the little arm, about 4" long with the tab on the end, need to end up? IIRC from looking at 140's and the like it makes contact where the transmission bolts to the torque tube, but the exact "spot" doesn't seem obvious.
If someone could take a pic or two and post of their helper spring setup, I would REALLY appreciate it!
- 501 Club
- Posts: 3357
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
Buncha other junk
- Circle of Safety: Y
That arm with the tab on it pushes into the end of the transmission where the transmission meets the toque tube. There is a hole on the end of the transmission that the tab pushes into. I will try to take a picture tonight but I miss placed my camera cable and I need to find it.
Good judgment comes from experience, and experience comes from poor judgment.
1959 LO-Boy 1950 Super A
- 501 Club
- Posts: 725
- Joined: Wed Jun 23, 2004 8:19 am
- Location: Middleboro MA usa
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A
Return to Farmall A, Super A, AV
Who is online
Users browsing this forum: No registered users and 1 guest