151 plow disc size

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Kirk-NJ
5+ Years
5+ Years
501 Club
501 Club
Posts: 705
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

151 plow disc size

Postby Kirk-NJ » Tue Nov 13, 2012 9:48 am

What should a 151 rear mounted plow disc measure with little use?
Thanks, Kirk

cub47
5+ Years
5+ Years

Re: 151 plow disc size

Postby cub47 » Tue Nov 13, 2012 9:52 am

26" diameter would be a new disc size.

Former Member
5+ Years
5+ Years

Re: 151 plow disc size

Postby Former Member » Tue Nov 13, 2012 10:12 am

It will work effectively down to about 21" to 22".

I know of a couple good used disc's if you need one. (Not mine)

Kirk-NJ
5+ Years
5+ Years
501 Club
501 Club
Posts: 705
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Re: 151 plow disc size

Postby Kirk-NJ » Tue Nov 13, 2012 12:23 pm

Ok, Thanks guys. Going to look at one tomorrow. Just wanted to know what to look for.

Kirk

Former Member
5+ Years
5+ Years

Re: 151 plow disc size

Postby Former Member » Tue Nov 13, 2012 12:39 pm

On the 151, there are 2 issues to look for besides the disc size.

Take a copy of the manual and make sure you get ALL the parts. There are a lot of them, very hard to find, and it is worthless without ALL of them.

Secondly, check the bearing play. If the disc is worn down, the bearing will too. the 151 has a chilled disc bearing, not a Timken. It is an oblong stub that fits into a polished socket. The bearing retainer should have a felt gasket to prevent dirt getting inside.

If you grab the disc and there is much play, disassemble the bearing and inspect it. It can be replaced with the Timken kind, off a 152, and it can also be packed with grease impregnated rags (stop-gap measure)

For modern use (not plowing 30 acres a year) it will work and last your lifetime even with a worn chilled bearing.

Kirk-NJ
5+ Years
5+ Years
501 Club
501 Club
Posts: 705
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Re: 151 plow disc size

Postby Kirk-NJ » Tue Nov 13, 2012 3:29 pm

Will check that and already downloaded a copy of the manual to have on hand. Thanks Dale

Kirk

TJG
5+ Years
5+ Years
501 Club
501 Club
Posts: 1224
Joined: Wed Jul 02, 2008 6:11 am
Location: MN, Mankato

Re: 151 plow disc size

Postby TJG » Tue Nov 13, 2012 3:42 pm

Dale is right, make sure you get all of the correct pieces. For example, the brace in the rear uses a "spacer bar". It appears in the pictures to be a standard drawbar, but the spacer bar is shorter than the standard drawbar. A typical drawbar will not work.

Mine has the chilled bearing and it had some wear, but I had a machine shop correct most of the play.

Todd

Former Member
5+ Years
5+ Years

Re: 151 plow disc size

Postby Former Member » Tue Nov 13, 2012 5:05 pm

TJG wrote:Dale is right, make sure you get all of the correct pieces. For example, the brace in the rear uses a "spacer bar". It appears in the pictures to be a standard drawbar, but the spacer bar is shorter than the standard drawbar. A typical drawbar will not work.

Mine has the chilled bearing and it had some wear, but I had a machine shop correct most of the play.

Todd


Todd, you are correct on the 152 mid mount.

However, he is asking about the 151 pull type.

Dale

User avatar
ShineRunner
5+ Years
5+ Years
Cub Star
Cub Star
Posts: 137
Joined: Thu Aug 18, 2011 7:37 pm
Zip Code: 28685
Tractors Owned: 1956 Cub
1946 Ford 2N
1958 Ford 861
1961 Ford 861
Circle of Safety: Y
Location: N/W North Carolina

Re: 151 plow disc size

Postby ShineRunner » Tue Nov 13, 2012 5:56 pm

I bought a set of 26" disc at Leinbach Machinery in NC. If you don't find something closer let me know and I will get you in touch with them.

danovercash
10+ Years
10+ Years
501 Club
501 Club
Posts: 3361
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Re: 151 plow disc size

Postby danovercash » Tue Nov 13, 2012 7:21 pm

I was able to pick up two disc last week. They came off of a Super A trailer plow. The best one was 24" so I should be good to go for a long time. I have two about 22" and one a little smaller. The owner is keeping the wheel and three rib tire that's on it. The rest is going on the scale . The bearings were stuck btw. :(
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)

Scrivet
5+ Years
5+ Years
501 Club
501 Club
Posts: 2352
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: 151 plow disc size

Postby Scrivet » Tue Nov 13, 2012 10:26 pm

How many holes? Doesn't the A use five bolts instead of the four for the Cub?

Former Member
5+ Years
5+ Years

Re: 151 plow disc size

Postby Former Member » Tue Nov 13, 2012 10:37 pm

ShineRunner wrote:I bought a set of 26" disc at Leinbach Machinery in NC. If you don't find something closer let me know and I will get you in touch with them.


They are 26", but are they 4 bolt, and do they have the proper concavity and thickness as a plow disc?

danovercash
10+ Years
10+ Years
501 Club
501 Club
Posts: 3361
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Re: 151 plow disc size

Postby danovercash » Tue Nov 13, 2012 11:09 pm

Scrivet, they were 4 hole, just like the Cub. The bearing assembly was different.
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)

Kirk-NJ
5+ Years
5+ Years
501 Club
501 Club
Posts: 705
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Re: 151 plow disc size

Postby Kirk-NJ » Wed Nov 14, 2012 4:55 am

Was there a pull disc plow made for the farmall A? If so what's the difference between the one for the A and the cub? Are there different part numbers that are located on the plow that I could look up? Don't want to buy something I can't use.

Kirk

danovercash
10+ Years
10+ Years
501 Club
501 Club
Posts: 3361
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Re: 151 plow disc size

Postby danovercash » Wed Nov 14, 2012 9:32 am

Yes, Different plows for both tractors. Cub had one disc, A, SA had two. A Cub harrow plow had two disc, but was intended for harrowing, not plowing. Didn't get any numbers off the SA plow, wish I had.
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 2 guests